期刊文献+

角接触球轴承支承的轴系振动频率计算方法 被引量:2

Calculation of Vibration Frequency for Rotor System Supported by Angular Contact Ball Bearing
下载PDF
导出
摘要 建立了角接触球轴承支承的轴系有限元模型,开发了相应的振动频率分析软件,计算了轴系静频,分析了在一定工况下转速对动频的影响和幅频特性,与实测试验结果吻合较好。结果表明:频域信号的最大峰值处的频率与轴系的静频相关。 The finite dement model is established for rotor system supported by angular contact ball bearings, and corresponding software is developed for analyzing vibration frequency of the system. The static frequency is calculated based on the finite element model, and the influence of rotating speed on the dynamic frequency and characteristics of frequency and amplitude is analyzed, coinciding with result of the actual experiment. The result indicate that frequency at the biggest peak value of frequency signal is related to the static frequency of the system.
机构地区 河南科技大学
出处 《轴承》 北大核心 2007年第11期1-5,共5页 Bearing
关键词 滚动轴承 振动 频率 有限元分析 频谱分析 幅值谱分析 rolliing bearing vibration frequency finite element analysis spectral analysis amplitude spectrum analysis
  • 相关文献

参考文献7

  • 1郑虎山.用振动分析法测定滚动轴承的刚度和阻尼[J].河北机械,1996(2):12-15. 被引量:4
  • 2力华东 李福益.航空轴承工作状态判断的试验研究[J].轴承,1985,(3).
  • 3Scheithe W.轴承振动分析[M].石化,译.1993,62-66.
  • 4Tandon N,Choudhury A. Ananalytical Model for Thprediction of the Vibration Response of Rolling Element Bearings Due to Alocalized Defect[J]. Journal of Soundan Vibratlon, 1997,205(3):275-292.
  • 5Zeki Kiral, Hira Karagulle. Simulation and Analysis Vibration Signals Generated by Roiling Element Beating with Defects[J].Tribology International,2003,36:667-678.
  • 6KimSun-Min,Lee Kang-Jae, Lee Sun-Kyu. Effect of Bearings up Port Structure on the High-speed Spindl Bearing Compliance [J].International Journal of Maehin Toolsand Manufacture,2002,(3):365-373.
  • 7俞铭华,吴剑国,曹骥.有限元法与面向对象编程[M].北京:科学出版社,2003,60—61.

共引文献12

同被引文献15

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部