期刊文献+

木框架有限元静力弹塑性分析 被引量:2

Nonlinear Analysis of Wood Truss with Software ANSYS
下载PDF
导出
摘要 采用大型有限元软件ANSYS10.0对单调水平荷载作用下一榀门式木框架及其各种加固方案进行了静力弹塑性计算分析.通过各种加固方式下屈服荷载、极限荷载大小的比较以及相对于未加固木框架提高程度的比较,从中提出了对门式木框架加固的最佳方案,从而为木柱梁-土坯组合墙体的抗震加固方案奠定了基础. Nonlinear analysis of wood frame under monotonic horizontal load is analyzed with software ANSYS10.0. Comparison of the yield load and extreme load between strengthened and unstrengthened wood truss is made and the best method to strengthen wood truss is put forward which lays a foundation for the analysis of seismic behavior of wood column and beam -adobe composite wall using finite element software ANSYS.
出处 《新疆大学学报(自然科学版)》 CAS 2007年第4期498-502,共5页 Journal of Xinjiang University(Natural Science Edition)
基金 新疆维吾尔自治区教育厅重点科研项目(项目编号:060115) 国家自然科学基金项目(项目编号:50768010)
关键词 木框架 ANSYS 广义hill屈服准则 有限元 wood truss ANSYS generalized hill failure criteria finite element
  • 相关文献

参考文献2

二级参考文献8

  • 1-.GB/T1935-91.木材顺纹抗压强度试验方法[M].北京:中国标准出版社,1992..
  • 2-.GB/T1939-91.木材横纹压试验方法[M].北京:中国标准出版社,1992..
  • 3-.GB8166-67.缓冲包装设计方法[M].北京:中国标准出版社,1992..
  • 4-.GB8168-87.包装用缓冲材料静态压缩试验方法[M].北京:中国标准出版社,1992..
  • 5(GB/1939 91)木材横纹抗压试验方法,1992年
  • 6(GB/T1935 91)木材顺纹抗压强度试验方法,1992年
  • 7(GB8166 87)缓冲包装设计方法,1992年
  • 8(GB8168 87)包装用缓冲材料静态压缩试验方法,1992年

共引文献23

同被引文献68

  • 1郭伟,费本华,赵荣军,周海宾.木桁架齿板连接性能模拟的研究现状[J].木材加工机械,2008,19(6):28-32. 被引量:6
  • 2王义.木结构系统中的有限元网络技术[J].国外林业,1994(2):50-51. 被引量:1
  • 3Hijikata K,Idota H,Tsujimoto N.Strength estimation and reinforcement of glue-laminated timber beams with circular through-hole[C].11th world conference on timber engineering,Italy,2010.
  • 4Campilho R D S G,Moura M F S F,Barreto A M J P,et al.Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining[J].Construction and Building Materials,2010,24:531-537.
  • 5Santos C L,Jesus A M P,Morais J J L,et al.Quasi-static mechanical behaviour of a double-shear single dowel wood connection[J].Construct Build Mater,2009,23:171-182.
  • 6Eckart R,Michael K.Numerical analysis and design of double-shear dowel-type connections of wood[J].Engineering Structures,2012,41:234-241.
  • 7Nima K,Hamid R V,Keith C.Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law[J].Engineering Structures,2013,46:606-614.
  • 8Hashin Z.Failure criteria for unidirectional fiber composites[J].J Appl Mech,1980,47(2):329-334.
  • 9Pablo G,Juan O.The utility of low-cost photogrammetry for stiffness analysis and finite-element validation of wood with knots in bending[J].Biosystems engineering,2013,114:86-96.
  • 10Dubois F,MéitéM,Pop O,et al.Characterization of timber fracture using the Digital Image Correlation technique and Finite Element Method[J].Engineering Fracture Mechanics,2012,96:107-121.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部