期刊文献+

燃气机热泵控制系统实验研究 被引量:1

Experimental Research on the Control System of Gas Engine Heat Pump
下载PDF
导出
摘要 本文应用先进流量控制策略研制了燃气机热泵PLC控制系统,采用增量式PID和模糊控制方法进行实验分析。结果表明:在正常运行阶段,增量式PID控制方法能够满足实验要求,但在大范围变工况情况下,适用性不强;而模糊控制则能较好地适应燃气机热泵系统的变容量调节,易于实现系统的优化运行。 Advanced control strategy is applied in developing PLC control system of Gas engine heat pump ( GEHP ). Experimenta nvestigations are carried out based on the simulated results of PID, fuzzy self-tuning PID controllers and the driven method for EEV. The results indicate that the PID controller can meet the demands of GEHP on steady conditions, but its performance is poor in those conditions with sudden large changes. The Fuzzy controller can be suitable for the above poor operating conditions.
出处 《中国建设动态(阳光能源)》 2007年第1期57-60,共4页
基金 国家自然科学基金资助项目(50376048) 教育部博士点基金项目(20030056027) 天津市科技发展项目(043112411) 211二期学科建设项目。
关键词 燃气机热泵 可编程逻辑控制器 控制策略 过热度 动态特性 Gas engine-driven heat pump PLC Control strategy Superheat Dynamic characteristic
  • 相关文献

参考文献3

二级参考文献12

  • 1孙庚山 兰西柱.工程模糊控制[M].北京:机械工业出版社,1997..
  • 2李友善 李军.模糊控制理论及其在过程控制中的应用[M].北京:国防工业出版社,1997..
  • 3Douglas R. Myers, James F. Davis, Charles E. Hurley. A Knowledge Based Approach to Malfunction Diagnosis of Discrete Operatiom Involving Programmable logic Controllers[J]. Proceedings of the 1990 American Control Conference,1990, 2: 1974-1979.
  • 4William B. Day, Michael J. Rostosky. Diagnostic Expert Systems for PLC Controlled Manufacturing Equipment [ J ].International Journal of Computer Integrated Manufacturing,1994. 7 (2): 116-122.
  • 5W. Hu, M. Schroeder, A. G. Starr. A Knowledge Based Real - Thne Diagnostic System for PLC Controlled Manufacturing Systems [J]. Proceedings of the IEEE International Cafference on Systems, Man and Cybernetics, 1999: 499- 504.
  • 6Karsten Lemmer, Bernhard Ober, Eckehard Schnieder.Model- Based Programming and Diagnosis for Programmable Logical Controllers [ J ]. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1995:4474 - 4479.
  • 7Barbara A. Osyk, Ming S. Hung, Gregory. R. Vadey. A Neural Network Model for Fault Detection in Conjunction with a Programmable Logic Controller [ J ]. Journal of Intelligent Manufacturing, 1994. 5 (2): 67-78.
  • 8Andrea Bernieri, Giovanni Betta, Antonio Pietrosanto, Carlo Sansone. A Neural Network Approach to Instrument Fault Detection and Isolation [J]. IEEE Transactions on Instrumentation and Measurement, 1995. 44 (3):747-750.
  • 9Giovanni Betta, Consolatina Liguori, Antonio Pietrosanto.An Advanced Neural- Network- Based Instrument Fault Detection and Isolation Scheme [ J ]. IEEE Transactions on Instrumentation and Measurement, 1998. 47 (2) : 507-512.
  • 10胡文彬,周祖德.基于PLC信号的现代制造系统顺序控制故障诊断[J].工业控制计算机,1997,10(6):27-29. 被引量:4

共引文献31

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部