摘要
研究分析了Sn元素对Fe-Ni-Al-Ga-P-B-Si-C系非晶合金玻璃形成能力及磁性能的影响。XRD分析表明,合金Fe68-xNi1Al5Ga2P9.65B4.6Si3C6.75Snx(x=0,0.5,1.5,2.5)在铸态下皆为非晶态,并且合金的脆性随着Sn含量的增加急剧增大;DSC分析表明,随着Sn含量的增加,合金的玻璃转变温度Tg逐渐下降,同时过冷液相区ΔTx逐渐变宽,而且增加幅度越来越大。Sn含量为0.5%和1.5%时,第一晶化放热峰Tp1已变得不明显,说明合金由二次晶化向一次晶化转变。当Sn含量为2.5%时,合金具有较好的软磁性能。
Effects of Sn on GFA and magnetic performance of Fe-Ni-Al-Ga-P-B-C-Si series amorphous alloy have been examined by XRD(X-ray diffraction).The results show that as-cast Fe68-xNi1Al5Ga2P9.65B4.6Si3Snx(x=0,0.5,1.5,2.5) alloy is amorphous alloy,and the brittleness of the alloy is sharply deteriorated with the increase of Sn content.DSC analysis reveals that with increasing Sn content,the glass transition temperature of alloy Tg is gradually declined and under-cooling liquid zone is gradually widened with more and more amplitude increase.First crystallized exothermal peak Tp1 is blurred with 0.5% and 1.5% Sn content,which shows that the alloy is changed from secondary crystallization to primary crystallization.The alloy containing 2.5% Sn has better soft magnetic property.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2007年第11期885-887,共3页
Special Casting & Nonferrous Alloys
基金
江苏省教育厅高校科学研究资助项目(03KJD430067)
关键词
FE基非晶合金
合金元素
玻璃形成能力
热稳定性
磁性能
Fe-based Amorphous Alloy,Alloying Elements,Glass Forming Ability,Thermal Stability,Magnetic Performance