摘要
采取熔融共混方法,以不同乙烯醇基含量的乙烯-乙烯醇共聚物(EVOH)即EVOH-56(乙烯醇含量56%)和EVOH-68(乙烯醇含量68%)作为基体,按照不同比例、不同处理方法和共混设备,填充Al2O3、TiO2、SiO2、XnO、CaCO3及蒙脱土纳米粒子后制备出了各种聚合物基无机纳米复合材料。在辐照计量分别为10、20和60mol/L的条件下,将EVOH-56/ZQ602/纳米TiO2体系和EVOH-56/YGO-1203/纳米TiO2体系与相应未辐照体系的力学性能作比较,辐照提高力学强度作用最大的是EVOH-56/纳米MMT体系,在20mol/L条件下,提高到原来的140%左右。
Using EVOH-56(VA content 56mol%) and EVOH-68(VA content 68mol%) as matrix and different nano-particles as the filler, different kinds of nano-composites were prepared by melt blending. At the irradiation doses of 10, 20 and 60mol/L, The mechanical strength of EVOH-56/ZQ602/nano-TiO2 system improves more than EVOH-56/ YGO-1203/nano-TiO2 system, the mechanical strength of EVOH-56/nanoMMT system improves most, increasing to 140% of neat matrix at the irradiation dose of 20mol/L.
出处
《功能材料》
EI
CAS
CSCD
北大核心
2007年第A09期3617-3620,共4页
Journal of Functional Materials
基金
教育部博士点基金资助项目(20040183007)