期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

往复式单螺杆销钉挤出机停留时间分布研究 被引量：5

STUDY OF THE RESIDENCE TIME DISTRIBUTION IN THE BUSS KNEADER
下载PDF
导出
摘要 使用Polyflow软件对往复式单螺杆销钉挤出机(Buss机)三类典型螺纹元件的停留时间分布(RTD)进行了三维动态模拟,分析了工艺条件和物料特性对RTD的影响。根据Buss机的螺杆组合构型,应用卷积技术求得了物料沿整根螺杆的RTD曲线,探讨了物料在Buss机内的RTD规律与工艺条件变化的相关性。 The residence time distributions（RTD） of the common screw elements in the Buss kneader were calculated by the Polyflow software. The effects of the operating conditions and the character of the material on RTD were analyzed. Based on the screw configuration, the RTD of the whole screw was assembled by the convolution technique. The influences of the operating conditions on RTD in the Buss kneader were discussed.
作者 毕超 江波
机构地区 北京化工大学机电工程学院
出处 《工程塑料应用》 CAS CSCD 北大核心 2007年第12期72-76,共5页 Engineering Plastics Application
关键词 往复式单螺杆销钉挤出机 停留时间分布 有限元模拟 卷积 Buss kneader, residence time distribution, finite element simulation, convolution
分类号 TQ320.5 [化学工程—合成树脂塑料工业]
  • 相关文献

参考文献12

  • 1武停启,江波,王春芬.往复式销钉螺杆挤出机设计原理[J].中国塑料,2002,16(1):70-73. 被引量：9
  • 2武停启,江波,许澍华.往复式销钉螺杆挤出机混合机理概述[J].中国塑料,2002,16(9):7-10. 被引量：6
  • 3张宝辉,许澍华,江波.WXJ-140往复式销钉螺杆挤出机的研究与开发[J].塑料,2006,35(2):78-80. 被引量：4
  • 4White J L, Lyu M Y. Development of the modem Buss kneader anti the study of its flow and mixing mechanisms [ J]. Polymer Plastics Technology and Engineering, 1998,37 ( 3 ) : 385 - 410.
  • 5Lyu M Y, White J L. Residence time distributions and basic studies of flow and melting in a modular Buss Kneader[ J]. Polym Eng Sci,1998,38(9) :1 366 - 1 377.
  • 6Hoppe S, Detrez C, Pla F. Modeling of a cokneader for the manufacturing of composite materials having absorbent properties at ultra-high-frequency waves. Part 1 : Modeling of flow from residence time distribution investigations[ J]. Polym Eng Sci ,2002,42(4) : 771 - 780.
  • 7Bi Chao, Jiang Bo, Li Ao. Digital image processing method for measuring the residence time distribution in a plasticating extruder [J]. Polym Eng Sci, 2007,47(7) :1 108 -1 113.
  • 8Levenspiel O. Chemical Reaction Engineering [ M ]. Second Edition. New York : Wiley, 1992:253 - 314.
  • 9胡冬冬,陈晋南.啮合同向双螺杆挤出机中组合螺杆性能的数值研究(Ⅱ)混合特性分析[J].中国塑料,2005,19(6):103-109. 被引量：18
  • 10Bravo V L, Hrymak A N, Wright J D. Study of particle trajectories,residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders [ J ]. Polym Eng Sci, 2004,44(4) :779 -793.

二级参考文献27

  • 1胡冬冬,陈晋南.啮合同向双螺杆挤出机中组合螺杆性能的数值研究(Ⅱ)混合特性分析[J].中国塑料,2005,19(6):103-109. 被引量：18
  • 2耿孝正 张沛.塑料混合及设备[M].中国轻工业出版社,1991..
  • 3江波.特殊挤出机.轻工装备手册（4）[M].北京:机械工业出版社,1996..
  • 4DavidBTodd 著 詹茂盛 译.塑料混合工艺及设备[M].北京:化学工业出版社,2002..
  • 5James L White,Min-Yong L Y U.Development of the modern Buss kneader and the study of its flow and mixing mechanisms[J].Polym-Plast Technol Eng,1998,37 (3):385-410.
  • 6Kajiwara Tcshihisa, Nagasima Yuki. Numerical Study of Twin-Screw Extruders by Three-Dimensional Flow Analysis-Development of Analysis Technique and Evaluation of Mixing Performance for Full Flight Screws [J]. Polymer Engineering and Science, 1996, 36(16): 2 142-2 154.
  • 7Hongfei Cheng, Manas-Zkraower I. Study of Mixing Efficiency in Kneading Discs of Co-rotating Twin Screw Extruders [ J ]. Polymer Engineering and Science, 1997, 37 (6) :1 082-1 090.
  • 8Chih-Hsiang Yao, Manas-Zloezower I. Influence of Design on Mixing Performance in an Axial Discharge Continuotus Mixer-LCMAX40 [J]. Polymer Engineering and Science,1998, 38(6) :936-946.
  • 9David B Todd. Plastics Compounding Equipment and Processing[M]. New York: Hanser Publishers, 1989.
  • 10Avalosse Th, Rubin Y, Fondin L. Non-isothermal Modeling of Co-rotating and Contra-rotating Twin Screw Extruders[J ]. Journal of Reinforced Plastics and Composites, 2002,21(5) :419-429.

共引文献28

同被引文献116

引证文献5

二级引证文献4

工程塑料应用
2007年 第12期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部