摘要
The variation of tensile strength parallel to grain in Chinese fir and I-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood (GB 1927 to 1943 ? 1991), the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed: the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference (at 0.05 level).
The variation of tensile strength parallel to grain in Chinese fir and 1-214 poplar wood from plantations was studied in this paper. Aaccording to the national standards The Testing Methods for Physical and Mechanical Properties of Wood (GB 1927 to 1943 -- 1991), the small clear wood samples were cut and tested, which represent the south and north of trees with heights of 1.3, 3.3, 5.3 and 7.3 m. The results showed: the tensile strength parallel to grain of the north wood was higher than that of south wood. ANOVA shows that the tensile strength parallel to the grain with height is of significant difference (at 0.05 level).
基金
This work was supported by State Science and Technology Infrastructure Platform Projects (2004DEA70900).
关键词
中国杉
白杨
抗张强度
变异性
Chinese fir (Cunninghamia lanceolata), 1-214 poplar (Populus × euramericana cv. ), tensile strength, parallel, variability