期刊文献+

基于π网络零相位法石英晶体负载谐振频率测量技术研究 被引量:1

The Research On The π-Network Zero Phase Measurement Of The Load Resonant Frequency Of Quartz Crystals
下载PDF
导出
摘要 对基于π网络零相位法测量石英晶体负载谐振频率的3种测量方法进行了分析对比,重点对基于实体电容法的石英晶体负载谐振频率测量技术进行了分析研究。在此基础上,设计适用于实体电容法测量石英晶体负载谐振频率的测试系统。实验表明:负载谐振频率的测量误差达到±5×10-6以内。 Three methods of measuring quartz crystal load resonant frequency by zero phase technique in a pi-network are analyzed and compared, and a deep research on measurement of the load frequency of the quartz crystals using physical loadcapacitors is represented. Then a measurement system to determine the load resonant frequency with physical load capacitors is designed. The results of the experiments showed that the measurement error is less than ±5×10^-6.
出处 《传感器世界》 2007年第12期19-22,共4页 Sensor World
基金 北京市教育委员会科技发展计划面上项目(编号:KM200511232002)
关键词 石英晶体 测量技术 负载谐振频率 实体电容法 quartz crystals measurement load resonantfrequency physical capacitors
  • 相关文献

参考文献4

二级参考文献5

  • 1Li Dong,Asia Pacific Sympo Instrumentation,1997年
  • 2Saunders and Associates, Inc. Load refonant measurements of quartz crystals[EB/OL]. www. saunders-assoc. com/datasheets/papers/paper, 1998/2003- 09- 12.
  • 3SJ/Z11210-1999.石英晶体元件参数的测量.第4部分:频率达30 MHz石英晶体元件负载谐振频率和负载谐振电阻的测量方法及其他导出参数的计算[S].[S].北京:中华人民共和国信息产业部,1999-08-26..
  • 4SJ/Z11211-1999.石英晶体元件参数的测量.第5部分:采用自动网络分析技术和误差校正确定等效电参数的方法[S].[S].北京:中华人民共和国信息产业部,1999-08-26..
  • 5杨军,张其善,吴今培.嵌入式石英晶体网络分析仪的设计和实现[J].测试技术学报,2003,17(2):165-169. 被引量:5

共引文献21

同被引文献6

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部