期刊文献+

大块金属玻璃形成能力的研究进展

Research progress on glass-forming ability for bulk metallic glasses
下载PDF
导出
摘要 综述了近年来所发现的表征大块金属玻璃形成能力的参数,其中包括基于动力学、液相稳定性和抗晶化能力、物理结构参数、液相稳定性和原子尺寸结构、价电子浓度和有序相与无序相的竞争.指出了大块金属玻璃形成能力研究的复杂性,以及理论基础的重要性. The latest research parameters on glass-forming ability (GFA) for bulk metallic glasses are summarized. The parameters are based on kinetics, stability of liquid phase and anti-crystallizing ability, physical and chemical parameters, stability of liquid phase and atomic configuration, the valence electron concentration, order-disorder competition, respectively. Finally, it is pointed out that research on GFA for bulk metallic glasses is a complex program. The theories should play important role in studying glassforming ability for bulk metallic glasses.
出处 《材料研究与应用》 CAS 2007年第4期245-251,共7页 Materials Research and Application
基金 国家"863"高技术项目基金资助(2003AA302520)
关键词 大块金属玻璃 非晶形成能力 研究进展 bulk metallic glass glass-forming ability research progress
  • 相关文献

参考文献19

  • 1[1]INOUE A.Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta Materialia,2000,48(1):279-306.
  • 2[2]WANG W H,DONG C,SHEK C H.Bulk metallic glasses[J].Materials Science and Engineering R:Reports,2004,44(2-3):45-89.
  • 3[3]SHEN T D,SCHWARZ R B.Bulk ferromagnetic glasses in the Fe-Ni-P-B system[J].Acta Materialia,2000,49:837-840.
  • 4[4]LIN X H,JOHNSON W L.Formation of Ti-Zr-Cu-Ni bulk metallic glasses[J].J Applied Physics,1995,78(11):6514-6521.
  • 5[5]ZHANG T,INOUE A.Thermal and mechanical properties of Ti-Ni-Cu-Sn amorphous alloys with a wide supercooled liquid region before crystallinzation[J].Materials Transactions JIM,1998,39(10):1001-1003.
  • 6[6]NISHIYAMA N,INOUE A.Glass-forming ability of bulk Pd40Ni10Cu30P20 alloy[J].Materials Transactions JIM,1996,37(10):1531-1539.
  • 7[7]SHEN T D,SCHWARZ R B.Bulk ferromagnetic glasses prepared by flux melting and quenching[J].Applied Physics Letters,1999,75(1):49-51.
  • 8蔡安辉,潘冶,孙国雄,阮许平.基于动力学的大块金属玻璃形成能力研究[J].中国工程科学,2004,6(1):68-73. 被引量:2
  • 9[9]LU Z P,LIU C T.A New approach to understanding and measuring glass formation in bulk amorphous materials[J].Intermetallics,2004(12):1035-1043.
  • 10[10]SENKOV O N,SCOTT J M.Glass forming ability and thermal stability of ternary Ca-Mg-Zn bulk metallic glasses[J].Journal of Non-Crystalline Solids,2005,351(37-39):3087-3094.

二级参考文献21

  • 1Inoue A,Zhang T, Masumoto T.Amorphous Zr-Al-TM(TM= Co, Ni, Cu) Alloys with Significant Supercooled Liquid Region of over 100 K. Mater Trans JIM,1991,32:1 005- 1 010.
  • 2Inoue A, Zhang T, Nishiyama Net al. Preparation of 16nmm Diameter Rod of Amorphous Zr65 Al7.5 Ni10 Cu17.5 Alloy. Mater Trans JIM, 1993, 34:1 234 - 1237.
  • 3Inoue A, Shihata T, Zhang T. Effect of Additional Element on Class Transition Behavior and Glass Formation Tendency of Zr-Al-Cu-Ni Alloys. Mater Trans JIM, 1995,36:1 420- 1 426.
  • 4Peker A, Johnson W L. A Highly Processable Metallic Glass: Zr41.2Ti13.sCu12.sNi10Be22.5 .J Appl Phys Lett, 1993,63:2 342 - 2 344.
  • 5Inoue A, Zlmng T. Fabrication of Bulk Glassy Zr55Al10Ni5Cu30Alloy of 30mm in Diameter by a Suction Casting Method. Mater Trans JIM, 1996,37:185 - 187.
  • 6Inoue A, Nishiyama N,Kimma H. Preparation and Thermal Stability of Bulk Amorphous Pd40Cu30Ni10P20 Alloy Cylinder of 72mm in Diameter. Mater Trans JIM, 1997.38:179 - 183.
  • 7Takeuchi A, Inoue A. Caleulatitm of Mixing Enthalpy and Milch Entropy for Ternary Amorphous Alloys. Mater Trans JIM, 2000, 41:1372- 1378.
  • 8Zhang Y,Zhao D Q,Pan M X et al.Glass Forming Properties of Zr-based Bulk Metallic Alloys. Journal of Non-Crystalline Solids, 2003,315 ( 1 - 2) :206 -210.
  • 9Lu Z P, Tan H, Li Y et al. The Correlation between Reduced Glass Transition Temperature and Glass Forming Ability of Bulk Metallic Glasses. Scripta Mater ,2000,42(7) :667 - 673.
  • 10Lu Z P, Liu C T. A New Glass-forming Ability Criterion for Bulk Metallic Glasses . Acta Materialia,2002,50(3):3 501 - 3 512.

共引文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部