期刊文献+

基于部分电感模型的回路耦合干扰分析 被引量:7

Loop Coupled EMI Analysis Based on Partial Inductance Models
下载PDF
导出
摘要 电力电子系统中回路之间的电磁场耦合是电磁干扰主要传播方式之一,为了准确预测系统级的电磁干扰,需要对回路耦合干扰进行定量计算。基于部分单元等效电路(partial element equivalent circuit,PEEC)的部分电感理论,建立了典型电力电子系统回路耦合电磁干扰的模型,主要包括导线之间空间磁场形成的互感耦合和接地回路之间共地阻抗耦合的模型。在实验室中构建了物理对象研究平台,分别对差模电流和共模电流产生的回路耦合干扰进行了测试,实验结果与计算结果对比证明了方法的正确性。 Electromagnetic coupling between two loops inside power electronic systems is main mode for EMI propagation. In order to predict emission level, it is significant to calculate loop coupled EMI. This paper investigates loop coupled EMI issues based on partial inductance model deduced from partial element equivalent circuit (PEEC). The mutual inductance coupling between wires and common ground impedance coupling for grounding loops are modeled respectively. The coupled EMI generated by differential-mode and common-mode current are experimentally studied. The comparison between measured and calculated EMI noise voltage validates proposed analysis and models.
出处 《中国电机工程学报》 EI CSCD 北大核心 2007年第36期52-56,共5页 Proceedings of the CSEE
基金 国家自然科学基金项目(50677070) 国家自然科学基金委员会创新研究群体科学基金(50421703)。~~
关键词 电磁干扰 部分单元等效电路 部分电感 互感 接地阻抗 electromagnetic interference partial elementequivalent circuit partial inductance mutual inductance ground impedance
  • 相关文献

参考文献19

二级参考文献73

  • 1孟进,马伟明,张磊,赵治华.开关电源变换器传导干扰分析及建模方法[J].中国电机工程学报,2005,25(5):49-54. 被引量:66
  • 2Clavel E, Schanen J L. Influence of an impedance step in interconnection influence calculation[J]. IEEE Transaction on Magnetics, 1996, 32(3): 824-827.
  • 3Wyk J D V, Lee F C. Power electronics technology at the dawn of the new millennium-status and future[C]. Proceedings of Power Electronics Specialists Conference, IEEE, Virginia Tech, USA, 1999.
  • 4Lu Guoquan, Nelson D J, Borojevic D, et al. An innovative for packaging power electronics building blocks using metal posts interconnected parallel plate structures[J]. Journal of IEEE-Component,Packaging, and Manufacture Technology Transactions, Part B, 1999,22(2): 136-144.
  • 5Lin Xingsheng, Calata J N. The packaging of integrated power electronics modules using flip-chip technology[C]. Proceedings of 17th Power Electronics Seminar, New Orleans, Louisiana, USA , 1999.
  • 6卡兰塔罗夫,陈汤铭.电感计算[M].北京:机械工业出版社,1992.
  • 7Carpes W P Jr, Ferreira G S, Raizer A. TLM and FEM applied in the analysis of electromagnetic coupling[J]. IEEE Transactions on Magnetics, 2000, 36(4): 982-985.
  • 8Ruehli A E, Paul C, Garrett J. Inductance calculations using parital inductances and micromodels[C]. IEEE International Symposium on Electromagnetic Compatibiltiy, Atlanta, Georgia, USA, 1995.
  • 9Leferink F B J. Inductance calculations: methods and equations[C]. IEEE, International Symposium on Electromagnetic Compatibility, Atlanta, Georgia, USA, 1995.
  • 10Beukes H J, Enslin J H R, Spee R. Busbar design considerations for high power IGBT converters[C]. IEEE, Power Electronics Specialists Conference, St. Louis, Missouri, USA, 1997.

共引文献232

同被引文献115

引证文献7

二级引证文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部