期刊文献+

角联锁织物的拉伸性能分析 被引量:3

Tensile strength property of angle-interlock woven fabric
下载PDF
导出
摘要 介绍了角联锁织物的结构特点,采用小样箭杆织机织造了层数为2层、3层到9层的角联锁织物共8块,探讨了角联锁织物的拉伸性能与其结构层数之间的关系。结果表明,随着角联锁织物层数的增加,其断裂伸长率也会随之增加,但到一定层数时,断裂伸长率反而出现降低趋势。 The characters of angle-interlock.woven fabric structure was introduced. A sample rapier loom was used to weave eight angle-interlock woven fabrics. The layers were from two to nine. The tensile strength of angle-interlock woven fabric and the relationship between the tensile strength property and the structure of angle-interlock woven fabric were studied. The results showed that the tensility was enhanced with increasing the layers. However, if the number of layers exceed a certain value, the tensility would descend.
出处 《纺织科技进展》 CAS 2007年第6期60-62,共3页 Progress in Textile Science & Technology
关键词 角联锁织物 拉伸性能 弹性模量 angle-interlock woven fabric tensile strength tensile modulus
  • 相关文献

参考文献8

二级参考文献11

  • 1陈雁,翟东梅.厚型织物结构的探讨[J].苏州丝绸工学院学报,1995,15(1):33-41. 被引量:3
  • 2WHITNEY T J, CHOU T W. Modeling of 3-D Angle-Interlock Textile Structural Composite [ J ]. Journal of Composite Materials , 1989,23 (9) :472 - 484.
  • 3BYUN J H, CHOU T W. Elastic properties of three-dimensional angle-interlock fabric performs[ J]. Journal of the Textile Institute, 1990,81 (4) :538 - 548.
  • 4TAN P, TONG L, STEVEN G P. Modeling approaches for 3D orthogonal woven composite [ J ]. Journal of Reinforced Plastics and Composites, 1998,17 (6) :545 - 577.
  • 5刘雍.[D].天津:天津工业大学,2005.
  • 6肖长发.纤维复合材料[M].北京:中国石化出版社,1995.9-11.
  • 7Frank K K.3D textile reinforced in composites materials [A].In:Antonio Miravete eds.3D Textile Reinforced Composites [ C ].England:Woodhead Publishing Limited,1999.9-40.
  • 8聂建斌,卢士艳.Woven Structure and Design[M].北京:中国纺织出版社,2004.133-134.
  • 9马崇启.三维机织物的织造方法探讨[J].天津纺织工学院学报,1999,18(4):62-66. 被引量:8
  • 10易洪雷,丁辛.三维机织复合材料力学性能研究进展[J].力学进展,2001,31(2):161-171. 被引量:55

共引文献36

同被引文献13

引证文献3

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部