期刊文献+

基于虚温定义的粘弹性有限元方法

Viscoelastic Finite Element Method Based on Definition of Fictive Temperature
下载PDF
导出
摘要 基于NARAYANASWAMY提出的虚温定义,用虚温表示的温度变化产生的折算应变率替代Swanson模型中的应变率修正函数,获得了基于虚温定义的粘弹性材料的应力应变本构方程,并导出基于虚温定义的粘弹性非线性有限单元法计算公式。计算结果验证了此基于虚温定义的粘弹性分析方法的正确性。 The intrinsic stress and strain equation of viscoelastic material based on fictive temperature put forward by NARAYANASWAMY was gained in this paper, when the correction function of strain ratio in Swanson model was replaced by the obversion strain ratio presented by fictive temperature caused by temperature change, The computation formula of nonlinear finite dement method for viscoelastic material was derived based on fictive temperature. The calculation results showed that this analysis method was correct.
出处 《上海航天》 北大核心 2007年第5期19-22,共4页 Aerospace Shanghai
关键词 粘弹性材料 虚温 应力应变本构方程 非线性有限单元法 Viscoelastic material Fictive temperature Intrinsic stress and strain equation Nonlinear finite element method
  • 相关文献

参考文献5

  • 1李录贤,叶天麒,沈亚鹏,左建政,朱祖念,张善祁,王至存.三维药柱的热粘弹性有限元分析[J].推进技术,1997,18(3):45-50. 被引量:27
  • 2蔡锷.粘弹性力学基础[M].北京:北京航空航天大学出版社,1990.
  • 3杨挺青.粘弹性力学教程[M].武汉:华中理工大学出版社,1992.
  • 4NARAYANASWAMY O S.A model of structural relaxation in glass[J].Journal of the American Ceramic Society,1971,5(10):491-498.
  • 5FINNE F,FUTSAETHER C,BOTNAN J I.Three-dimensional analysis of solid propellant grain using a nonlinear viscoelastic model[R].AIAA 90-2090.

二级参考文献2

  • 1李录贤,1994年
  • 2丁皓江,弹性和塑性力学中的有限单元法(修订本),1989年

共引文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部