摘要
实验采用海水对实际印染废水进行处理。考察了pH、海水投加量、温度以及沉淀时间等对脱色率的影响,同时对海水脱色的机理进行了探讨。结果表明,废水的脱色率主要受pH、海水投加量的影响。海水在适宜的条件下对实际印染废水的脱色率可达到99%以上,CODCr去除率可达到57%。
Seawater has been used for treating actual printing and dyeing wastewater. The effects of the parameters such as pH, seawater dosage , temperature and flocculent settling time on the decoloration rate have been studied. The coagulation mechanism has also been investigated. The experimental results show that the decoloration rate depends on the pH of seawater and seawater dosage. Under suitable conditions, the seawater has a quite good decolorization effect on the real printing and dyeing wastewater, reaching more than 99%, and the CODCr removal rate can be 57%.
出处
《工业水处理》
CAS
CSCD
北大核心
2007年第12期34-36,共3页
Industrial Water Treatment
基金
山东省环保科研计划项目(鉴定号2005-365)
关键词
印染废水
镁盐
海水
脱色
printing and dyeing wastewater
magnesium salt
seawater
decolorization