摘要
国检大厦工程地下室2层,地上31层,钢筋混凝土结构高度142.75m,首层大厅为架空层,层高19.55m,为实现该部位结构转换,采用落地式钢管排架支撑作为转换结构模板支撑,并在施工中采取了相应的安全技术措施。
The project is a building of 2 storey of basement and 31 storey above the ground, the height of RC structure 142.75m and the elevated ground hall 19.55m high. To guarantee the structural transfer, down-to-ground scaffolding row was used to support the formwork of the structure and safe technical measures were employed in the construction.
出处
《建筑技术》
北大核心
2008年第1期35-37,共3页
Architecture Technology
关键词
桁架
转换梁
模板
支撑
truss
transfer beam
formwork
support
