某赖氨酸废水处理工程的设计与调试

DESIGN AND COMMISSIONING OF A LYSINE WASTEWATER TREATMENT PROJECT

采用SBR工艺处理赖氨酸废水,原水COD浓度2000mg/L左右、氨氮浓度300mg/L左右时,经本工艺处理后出水COD浓度小于100mg/L,氨氮浓度小于15mg/L,达到国家排放标准。

This paper introduces a project of lysine wastewater treatment with SBR reactors. Under the conditions of influent COD and NH3-N being about 2000 mg/L and 300 mg/L respectively, the effluent COD and NH3-N reached to below 100 mg/L and 15 mg/L, meeting the national discharge standard. The project＇s results provide a reference for similar wastewater treatment.