摘要
采用Fe-28Mn-4Si(加Mg)形状记忆合金热轧无缝管制成管接头,管接头内径平均变形量5.6%时,形状恢复率为38.68%,管接头与被接管连接后,具有高的连接强度及良好的密封性,在材料试验机上需1.75t的力才能将连接好的被接管一端拉出,并且管接头承受4MPa压力不泄漏。
Pipe joints made of the Fe 28Mn 4Si(adding Mg)shape memory alloy(SMA) seamless steel tube has been studied in this paper.When the inner radus of steel tube is expanded by 5.6%,the strain recovery ratio will be 38.68%,and this strain recovery ratio is enough for using as pipe joints.The pulling test and leakage test results show that the pipe joints have high joint strength and good leakproofness.
出处
《金属热处理》
EI
CAS
CSCD
北大核心
1997年第8期8-9,共2页
Heat Treatment of Metals
关键词
铁基
形状记忆合金
管接头
连接强度
密封性
ferrous shape memory alloy,Si Mn system seamless steel tube,pipe joints