摘要
在分析CAN/LIN总线技术特点的基础上,分别选用MC68HC908GZ32和MC68HC908QL4单片机设计开发了某车型车门控制系统的CAN/LIN网关节点和LIN的硬件模块,并根据控制功能要求开发了控制软件,实现了电动车窗自动/手动升降和电动后视镜调节控制。最后将各模块安装在车门上进行了调试,测试结果表明,所设计模块运行稳定、性能可靠,达到了预定要求。
Based on the analysis of technical features of CAN/LIN bus,the CAN/LIN gateway node and LIN hardware module of one certain vehicle door control system are designed by using the single chip machine MC68HC908GZ32 and MC68HC908QIA respectively,the control software is developed according to the control requirement,and the control of electronic windows and rearview mirrors is realized.Finally,the door module is installed and tested in real vehicle,the results of test show that the performance of module is steady and reliable, and the requirement of design is achieved.
出处
《汽车技术》
北大核心
2008年第1期42-46,共5页
Automobile Technology
基金
863项目"面向汽车电子控制嵌入式系统的开发平台及其应用"(编号:2004AA1Z2380)
重庆市信息产业发展资金项目:"汽车网络(CAN/UN)关键控制模块及检测技术开发"(编号:渝经高新[2006]21号)
重庆市科委攻关项目:"面向汽车ABS嵌入式系统的专用开发平台及其应用"(编号:catc2006ab2026)。
