期刊文献+

接管轴向载荷对内压圆筒强度性能的影响 被引量:3

下载PDF
导出
摘要 采用有限元方法分析了接管轴向载荷对内压作用下开孔-接管区各个截面的弹性应力集中、应力分布以及结构的塑性极限内压的影响规律。分析结果表明,接管轴向载荷对内压圆筒弹性应力分布、内压承载能力有一定的影响,轴向载荷使横向截面最大应力出现的位置不断变化;轴向推力能减小应力集中系数和增强开孔-接管区的承载能力,轴向拉力能增大应力集中系数和降低开孔-接管区的承载能力。
出处 《石油机械》 北大核心 2008年第1期64-68,共5页 China Petroleum Machinery
  • 相关文献

参考文献10

  • 1Bijlaard P P. Stresses from radial loads and external mo- ments in cylindrical pressure vessels. Welding Research Supplement. Dec. 1955 . 608 -617.
  • 2Xue M D, Chen W, Huang K C. Stresses at the inter- section of two cylindrical shells. Nuclear Engineering and Design, 1995, (154) : 231 -238.
  • 3林杨杰,桑芝富,张月明.内压作用下斜接管结构塑性极限载荷的试验研究[J].化工设备设计,1999,36(6):14-18. 被引量:2
  • 4Liu Youhong, Zhang Bingsheng, Xue Mingde, et al. Limit pressure and design criterion of cylindrical pressure vessels with nozzles. International journal of pressure vessels and piping, 2004, (81) : 619 - 624.
  • 5Meshon J L, Mokhtarian K. Local stresses in cylindrical shells due to external loadings on nozzles supplement to WRC Bulletin No. 107 (Revision I ) . WRC Bulletin No. 297, 1984.
  • 6Aleksandar Petrovic. Stress analysis in cylindrical pressure vessels with loads applied to the free end of a nozzle. Pressure vessels and piping, 2001, ( 78 ) : 475 - 493.
  • 7桑芝富,李磊,钱惠林.接管轴向推力作用下压力容器开孔-接管处局部应力的研究[J].南京化工学院学报,1995,17(2):4-10. 被引量:9
  • 8任智杰.接管轴向外力对压力容器强度的影响[J].机械工程师,2003(3):31-33. 被引量:6
  • 9Nadarajah C, Mackenzie D, Boyle J T. Limit and shakedown analysis of nozzle/cylinder intersections under internal pressure and in - plane moment loading. Int. J. of press. Vess & piping, 1996 (68) : 261 - 272.
  • 10章为民,陆明万,张如一.确定实际极限载荷的零曲率准则[J].固体力学学报,1989,10(2):152-160. 被引量:48

二级参考文献1

共引文献58

同被引文献27

引证文献3

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部