期刊文献+

软件无线电中的正交解调新算法 被引量:4

A New Algorithm for Quadrature Demodulation in Software Radio
原文传递
导出
摘要 软件无线电作为无线通信技术的又一次革命,是目前通信领域中最为重要的研究方向之一。文章基于多相滤波的数字正交变换技术,通过数学推导,提出了一种软件无线电中的数字化正交解调新算法。理论分析和仿真结果显示该解调方案的抗干扰性能有明显改善,与传统解调方法相比,省去了本地载波恢复,通用性强、简单易实现、计算量小且易于用DSP实现,适合在软件无线电接收机中使用。 As another revolution in wireless communication, software radio (SR) has become one of the most important research fields. Based on polyphase filtering technology for digital quadrature transform, this paper presents a new algorithm for digital quadrature demodulation in SR through mathematical derivation. Theoretical analysis and simulation results indicate that the noise-resisting property of the demodulation scheme has been improved obviously. Comparing with traditional methods, it omits the resuming of local carrier, and is all-purpose, simple, with low calculation requirement and easier to be realized on DSP. The algorithm is fit to be implemented in SR receivers.
出处 《通信技术》 2008年第1期39-40,56,共3页 Communications Technology
基金 湖南省教育厅科研基金资助项目(编号:06C115)
关键词 软件无线电 正交解调 多相滤波 software radio quadrature demodulation polyphase filtering
  • 相关文献

参考文献6

  • 1王松涛,刘宏立,毛六平,童调生.基于软件无线电的QPSK解调的设计[J].微计算机信息,2007(01S):230-231. 被引量:5
  • 2Araujo T, Dinis R, Analytical Evaluation and Optimization of the Analog-to-Digital Converter in Software Radio Architectures[J]. Vehicular Technology, IEEE Transactions, 2007, 56(04): 1964-1970.
  • 3Ulrich Rohde, Jerry Whitaker. Communications Receivers-DSP Software Radio and Design[M]. Third Edition, New York: Mc Graw Hill Professional, 2001:463-465.
  • 4吴丹,顾学迈,吴芝路.基于软件无线电的数字化接收机的研究[J].电子技术应用,2005,31(9):46-48. 被引量:8
  • 5Yuan Yan, Shen Wei-wei, Wang Zong-xin, MPSK Adaptive Modulation by Using Software Radio[J]. Journal of Fudan University (Natural Science), 2006, 45 (01) : 131-134.
  • 6Cai Quanwei Wei Ping Xiao Xianci .A Digital Modulation Recognition Method[J].IEEE Trans.on Communications.2004.COM-38(07):863-866.

二级参考文献10

  • 1汪洋,葛临东.利用CORDIC算法在FPGA中实现可参数化的FFT[J].微计算机信息,2005,21(06Z):101-103. 被引量:4
  • 2Joe M. The Software Radio Architecture[J]. IEEE Communications Magzine, May 1995:3-26.
  • 3V. Bose, M. Ismert, J. Guttag. Virtual Radio[J]. IEEE Selected Areas in Communicaions. 1995;17(4):591-602.
  • 4J. Mitola. Ⅲ. Software Radio architecture: a mathematical perspective[J]. IEEE Journal on Selected Areas in Communication. 1999 ; 17(4):514-538.
  • 5D. Domani, U. Gtti, P. Malcovati,F. Maloberti. A muhipath polyphase digital-to-analog converter for software radio transmission systems[Jl.The 2000 IEEE International Symposium on Circuits arid Systems. ISCAS 2000 Geneva. 2000:361-364.
  • 6杨小牛 邹少丞 楼才义.软件无线电技术与实现[M].北京:电子工业出版社,2004..
  • 7Walter J S.A Unified Algorithm for Elementary Functions[A].AFIPS Spring Joint Computer Conf[C].1997,38.
  • 8Volder J E.The CORDIC Trigonometric Computing Technique.IEEE Trans.Elec.Comp.,1959.
  • 9M Kuhlman,K K Parhi.A High-Speed CORDIC Algorithm and Architecture for DSP Applications.IEEE Workshop on Signal Processing Systems,1999.
  • 10Ray Andraka.A Survey of CORDIC Algorithms for FPGA Based Computers.Andraka Consulting Group,Inc 1998 ACM.

共引文献11

同被引文献16

  • 1程水英,武传华,张剑云.带通欠采样技术及在数字中频软件接收机中的工程应用[J].电路与系统学报,2006,11(3):22-25. 被引量:9
  • 2我国首台CPT原子钟样机在武汉研制成功[J].光机电信息,2007,24(2):55-56. 被引量:1
  • 3朱光明,程建远,刘保童.数字信号处理[M].北京:机械工业出版社,2006.
  • 4Pellon L E.A Double Nyquist Digital Product Detector for Quadrature Sampling[J].IEEE Trans.On Signal Processing,1992,40(07):1670-1681.
  • 5WILLIAN P O, WHITE~akN D, SHARMIN A. On the Performance of PCM/FM+FM/FM Systems[C]. USA: [s. n. ], 1993:383-396.
  • 6LEE Sang-Rae, RA Sung-Woong. Variable Cutoff Frequency Pre-modulation Filter for PCM/FM Transmission System[J]. IEICE Transactions on Communications, 2008, 91(05): 1387-1396.
  • 7OPPENHEIM A V, SCHAFER R W. Discrete-Time Signal Processing[M].USA:Prentice-Hall, 1999.
  • 8杨小牛,楼才义,徐建良.软件无线电原理与应用[M].北京:电子工业出版社,2004.
  • 9程佩青.数字信号处理教程[M].2版.北京:清华大学出版社,2004.
  • 10刘丽华,赵宗印.软件无线电中的带通采样分析[J].无线电工程,2007,37(1):26-29. 被引量:8

引证文献4

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部