期刊文献+

离心钢管混凝土弯扭构件试验研究与理论分析 被引量:4

Experimental and theoretical analysis for centrifuge concrete filled-steel tubular members subjected to bending-torsion
下载PDF
导出
摘要 在对组合结构材料离心混凝土圆筒试块的抗压试验和钢板材的抗拉试验的基础上,进行了11个离心钢管混凝土弯扭构件的试验研究,研究了构件在弯扭组合作用下的工作性能与机理.并基于组成离心钢管混凝土的钢材与离心混凝土的本构关系,利用试验实测的参数,建立了有限元分析模型.考虑不同弯扭作用的加载路径,对弯扭构件进行了全过程分析.结果表明,试验与理论分析结果吻合良好.根据试验与理论计算结果,提出了离心钢管混凝土弯扭构件的承载力相关方程,可为工程设计提供理论依据. Based on the material performance experiments of centrifuge concrete sample blocks and steel tubes, eleven members of centrifuge concrete filled-steel tubular (CCFT) subjected to bending-torsion were experimentally investigated to study the working performance and mechanism of CCFT. The finite element analysis (FEA) method was used to predict the performance of CCFT members subject to bending-torsion with measured parameters and the constitutive relationship of tubular and centrifuge concrete. The systematic analysis of CCFT bending-torsion member was performed considering different loading paths. The FEA model fitted the experimental results well. The interaction equation of bearing capacity of CCFT bending-torsion members was summarized for the engineering application.
出处 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2008年第1期116-121,共6页 Journal of Zhejiang University:Engineering Science
关键词 离心钢管混凝土 弯扭 加载路径 有限元分析 相关方程 centrifuge concrete filled-steel tubular (CCFT) bending-torsion loading path finite element analysis interaction equation
  • 相关文献

参考文献7

二级参考文献13

  • 1王泳嘉 邢纪波.离散单元法及其在岩土工程中的应用[M].沈阳:东北工学院出版社,1991.244-249.
  • 2袁明武 陈璞 等.SAP84版本5.0及其辅助模块使用手册[M].北京大学力学与工程科学系结构工程软件中心,1998..
  • 3.DL/T 5030-1996.电力部行业标准. 薄壁离心钢管混凝土结构技术规程[S].北京:电力工业部,1996..
  • 4宋永乐.[D].杭州:浙江大学,1988.
  • 5[9]KARLSSON I. Stiffness properties of reinforced concrete beams in combined torsion[M]. Sweden: Chalmers University of Technology Press, 1973.
  • 6[10]HSU T T C. Post-cracking torsional rigidity of reinforced concrete sections[J]. Journal of ACI, 1973,36(5):73-77.
  • 7宋永乐.[D].杭州:浙江大学,1988.
  • 8DL/T 5030-1996 电力部行业标准.薄壁离心钢管混凝土结构技术规程[S].[S].北京:电力工业部,1996..
  • 9ADAMS R D, PEPPIATT N A. Stress adhesive bonded tubular lap joints [J]. J Adhesion, 1977,9.1-18.
  • 10NAGAREJA Y R, ALWAR R S. Nonlinear stress analysis of adhesive tubular lap joint [J]. J Adhesion, 1977,10:97-106.

共引文献61

同被引文献25

引证文献4

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部