期刊文献+

甲烷在常三柴油-四氢呋喃混合溶剂中高压溶解度的测定 被引量:3

Determination of solubility of methane in mixture of atmospheric No.3 diesel oil-tetrahydrofuran under high pressure
下载PDF
导出
摘要 为了满足富氢气氛下煤直接液化基础数据的需要,选择常三柴油、四氢呋喃为混合溶剂,利用自建的循环法气体高压溶解度测定装置,测定了甲烷在柴油-四氢呋喃中的高压溶解度数据(273.45~293.75K,2.09~7.97MPa)。利用n-d-M-LP法以及C-G法计算了柴油的平均结构和特性参数,利用Peng-Robinson状态方程结合两种混合规则回归实验数据,得到CH4-柴油-四氢呋喃的交互参数,并估算了同条件下的溶解度数据,结果表明估算值与实验值吻合较好。 In order to meet the requirement for basic data of coal direct liquefaction in hydrogen-rich gas, the data of the high-pressure solubility of methane in the mixture of atmospheric No. 3 diesel oil and tetrahydrofuran at temperature from 273.45 K to 293.75 K and pressure from 2.09 MPa to 7.97 MPa were collected with a self-established apparatus that measured the solubility in the cyclic way. The average structural parameters and characteristic parameters of diesel oil were calculated with the n-d-M-LP method and Constantinou-Gani method. The regression analysis of binary interactive-parameters of methane-dieseltetrahydrofuran with the Peng-Robinson cubic equation of state combined by two mixing rules was used to estimate the solubility data under the same condition which well agreed with experimental data.
出处 《化工学报》 EI CAS CSCD 北大核心 2008年第2期287-292,共6页 CIESC Journal
关键词 甲烷 溶解度 汽液平衡 n—d—M-LP法 C-G法 methane solubility gas-liquid equilibrium n-d-M-LP method Constantinou-Gani method
  • 相关文献

参考文献15

  • 1Yang Kezhan, Barry B, Michael W, et al. Reaction of methane with coal. Fuel, 1997, 76 (12): 1105-1115
  • 2Nosa O E, Murray R G. Evidence for methane reactivity during coal pyrolysis and liquefaction. Fuel, 1990, 69 (10): 1276-1282
  • 3申峻,凌开成,邹纲明,王志忠.煤油共处理过程中的反应机理[J].煤炭转化,1999,22(4):5-9. 被引量:18
  • 4凌开成,邹纲明.兖州烟煤与石油渣油共处理的研究[J].煤炭转化,1997,20(2):62-66. 被引量:11
  • 5Brannan C J, Curtis C W, Cronauer D C, The effect of coal beneficiation and swelling on liquefaction behavior of Black Thunder coal. Fuel Processing Technology, 1995, 45 (1): 53-67
  • 6Shim J, Kohn J Po Multiphase and volumetric equilibria of methane-n-hexane binary system at temperatures between - 110℃ and 150℃. Journal of Chemical and Engineering Data, 1962, 7:3-8
  • 7Lin Shixiong(林世雄).Petroleum Refining Engineering(石油炼制工程).Beijing:Petroleum Industry Press,1988:139-147
  • 8Fu C T, Puttagunta V R, Vilseak G. Vapor-liquid equilibrium properties for pseudo-binary mixtures of CO2- athabasea bitumen and N2-athabasea bitumen. AOSTRA Journal of Research, 1985, 2 (2): 73
  • 9LuCuiying(吕翠英) XuYifang(徐亦芳) ShenFu(沈复).Representation of heavy oil extracts in UNIFAC function group method[J].石油学报:石油加工,1988,4(4):61-66.
  • 10Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method. ASTM D 3238-1995 (2000) el

二级参考文献18

共引文献29

同被引文献27

  • 1李兆业.中国铬盐生产现状与发展建议[J].无机盐工业,2005,37(2):1-3. 被引量:4
  • 2陈泽辉,富嘉文.用基团贡献法预测石油馏分汽液平衡的进展[J].石油大学学报(自然科学版),1993,17(6):131-138. 被引量:5
  • 3李兆业.铬盐行业的现状及发展建议[J].无机盐工业,2006,38(4):1-5. 被引量:21
  • 4高杰,李文.加拿大油砂资源开发现状及前景[J].中外能源,2006,11(4):9-14. 被引量:25
  • 5朱荣娇,于璟琳,徐伟,刘志华,田宜灵.CO_2+正己烷二元系统高压气液相平衡[J].化工学报,2006,57(10):2270-2277. 被引量:5
  • 6Ruzlcka, Fredenslund A, Rasmussen P. Representation of petroleum fraction by group contribution. Industrial Engineering Chemical Process Design and Development, 1983, 22 (1): 49-53.
  • 7Constantinou L, Gani R, O'Connell J P. Estimation of the acentric factor and the liquid molar volume at 298K using a new group contribution method. Fluid Phase Equilibria, 1995, 103: 11-22.
  • 8Constantinou L, Gani R. New group contribution method for estimating properties of pure compounds. AIChE Journal, 1994, 40:1697-1710.
  • 9Fu C T, Puttagunta V R, Vii scak G. Vapor-liquid equilibrium properties for pseudo binary mixtures of CO2- athabasca bitumen and N2 athabasca bitumen. AOS TRA Journal of Research, 1985, 2 (2): 73.
  • 10Zhu Ziqiang(朱自强),Yao Shanjing(姚善泾),Jin Zhangli(金彰礼).Fluid Phase Equilibrium Principle and Application(流体相平衡原理及其应用).Hangzhou:Zhejiang University Press, 1990:104- 132.

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部