期刊文献+

定位偏心轴冷温挤压成形工艺及模具 被引量:3

Forming process and dies of cold and warm extrusion for location eccentric shaft
下载PDF
导出
摘要 分析了定位偏心轴的形状特点,针对冷、温挤压各自的特点,采用两者相结合的成形工艺方案。制定了零件挤压成形图,确定了挤压工艺路线。校核了各道挤压工序的变形程度,同时介绍了冷温挤压模具。指出对于一些尺寸精度高、变形程度较大的零件,可采用冷、温挤压相结合的工艺进行成形;同时,在温挤压前,要预先合理地分配材料,以保证零件充分成形。考虑到坯料在温挤压时受到多种因素的影响,可采用冷推挤工序来确保零件关键部位的尺寸精度。 The forming characteristics of the location eccentric shaft was analyzed. According to the characteristics of cold and warm extrusion, the forming technology plan combining cold with warm extrusion was adopted. The extrusion forming drawing was made and the extrusion procedure route was confirmed. The deformation degree of each extrusion procedure was checked. The cold and warm extrusion dies were introduced. The conclusion is that the forming technology combined cold with warm extrusion can be used for the parts with high dimension precision and large deformation degree. Meanwhile, before warm extrusion, it must prearrange material rationally so as to guarantee the full forming of the part. Considering the blank was influenced by many factors during warm extrusion, the cold push-extrusion procedure can be adopted for assuring the high dimension precision of key positions of the part.
出处 《锻压技术》 CAS CSCD 北大核心 2008年第1期81-84,共4页 Forging & Stamping Technology
基金 上海市重点学科建设资助项目(J51402) 上海工程技术大学校重点学科资助项目(No.xk0705)
关键词 偏心轴 冷挤压 温挤压 挤压模具 eccentric shaft cold extrusion warm extrusion extrusion die
  • 相关文献

参考文献5

二级参考文献20

  • 1孟令先 等.摩托车超越齿轮冷挤压工艺研究[C]..北京:第三届全国青年学术年会议[C].,1998..
  • 2松永修一.[D].‘98北京中日冷挤压技术交流会,1998.
  • 3Wang X. Development of precision forging processes with axially driven container [C] . Osaka: Osaka University, 1997.
  • 4Osakada K, Hanami S, Wang X. Precision closed die forging of spline with axially driven container [C] . The procedings of the 47th Japan joint conference for the technology of plasticity Osaka University, 1995: 255-256.
  • 5洪深泽.冷挤压工艺及模具设计[M].安徽:安徽科学技术出版社,1985..
  • 6Pale J A, Shivpuri R,Altan T.Recent developments in tooling, machines and research in cold forging of complex parts[J].Journal of Materials processing Technology,1992,33(1-2):1-29.
  • 7Kang Dachang,Sun HongYi, Chen Yu, Yang Hongliang. Research on the "shear-extrusion" process to form large-scale cut-off valve bodies[J]. Journal of Materials processing Technology,2001,117:15-20.
  • 8Kim Hyunkee, Yagi Tetsuji,Yamanaka Masahito.FE simulation as a must tool in cold/warm forging process and tool design[J].Journal of Materials processing Technology,2000,98(2):143-149.
  • 9梁继才.[D].吉林大学,2001.
  • 10Altan Taylan,Knoerr Markus.Application of the 2D finite element method to simulation of cold-forging processes[J].Journal of Materials processing Technology,1992,35(3-4):275-302.

共引文献35

同被引文献31

引证文献3

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部