期刊文献+

液固外循环流化床起始外循环液体流量的实验研究 被引量:2

下载PDF
导出
摘要 为外循环流化床换热器的设计计算提供依据,以喷嘴为颗粒循环装置的液固外循环流化床换热器为研究对象,考察了颗粒直径、口径比、喷嘴安装位置、颗粒初始加入量及流体粘度对起始外循环液体流量的影响;得出了稳定操作情况下,液固外循环流化床换热器起始外循环液体流量与上述因素之间的经验关联式。结果表明:计算值与实验值吻合较好。
出处 《化工装备技术》 CAS 2008年第1期62-65,共4页 Chemical Equipment Technology
  • 相关文献

参考文献5

  • 1Zheng Ying, Zhu Jing- Xu (Jesse). The onset velocity of a liquid - solid circulating fluidized bed [ J ] , Powder Technology, 2001, 114: 244-251.
  • 2Fan Liang-Shin, Rong Her-Jean, Kunihiro Kitano. On the operating regimes of cocurrent upward gas-liquid-solid systems with liquid as the continuous phase [ J ] . Chemical Engineering Science, 1987, 42 (7) : 1853 -1855.
  • 3Bi H T, Grace J R. Flow regime diagrams for gas - solid fluidization and upward transport [ J ] . Int J Multiphase Flow, 1995, 21 (6): 1229-1236.
  • 4张少峰,王琦,赵斌,刘燕,高川博.用压差变化阈值确定外循环流化床的起始外循环流化速度[J].化工装备技术,2006,27(3):23-26. 被引量:3
  • 5张少峰,孙姣.气液固循环流化床颗粒分布板实验研究[J].化学工程,2006,34(3):20-23. 被引量:16

二级参考文献14

  • 1马国远,郁永章.全封闭热泵干燥系统冷凝温度对干燥能力的影响[J].郑州轻工业学院学报,1993,8(1):62-65. 被引量:3
  • 2张壁光,王喜平,赵忠信,郭建华,田树森.湿空气参数对除湿干燥机能耗的影响[J].林产工业,1994,21(3):13-14. 被引量:6
  • 3刘俊安,郁永章.热泵干燥系统的特性分析[J].西安交通大学学报,1989,23(5):93-100. 被引量:4
  • 4刘吉普,吴金香.管程内循环液固流态化强化换热技术研究[J].湘潭大学自然科学学报,1996,18(3):79-84. 被引量:10
  • 5Klaren D G.Fluidized bed heat transfer exchanger:A major improvement in severe fouling heat transfer[A].Taborek J.Heat Exchanger:Theory and Practice[C].Washington:Hemisphere Publishing Corporation,1981.885-896.
  • 6Klaren D G,Bailie R E.The non-fouling fluidized bed heat exchanger[A].Shah R H.National Heat Transfer Conference HTD,Vol 108:Heat Transfer Equipment Fundamentals Design,Application and Operating Problems[C].New York:ASME,1989.273-279.
  • 7贾丽云.液固循环流化床和流化床换热器流动特性的研究[M].天津:天津大学化工学院,1997.
  • 8欧翼应秀.热泵干燥系统的节能及循环改进研究:[博士论文].杭州:浙江大学,2000.
  • 9Saen-saby P, Peaserisan S. Effects of component arrangement and ambient and drying conditions on the performance of heat pump dryers. Drying Technology, 2003,21:103-127
  • 10Teeboonma U, Tiansuwan J,Soponronnarit S. Optimization of heat pump fruit dryers. Journal of Food Engineering,2003, 59:369-377

共引文献17

同被引文献19

  • 1王一平,刘俊杰,吴晨曦,朱丽.气液固循环流化床换热器中预分布器结构的优化[J].化工学报,2006,57(1):31-35. 被引量:8
  • 2许卫疆,车得福,徐通模.非球形颗粒的阻力系数与升力系数的数值求解[J].西安交通大学学报,2006,40(3):298-301. 被引量:8
  • 3张少峰,孙姣.气液固循环流化床颗粒分布板实验研究[J].化学工程,2006,34(3):20-23. 被引量:16
  • 4魏德洲.固体物料分选学[M].北京:冶金工业出版社,2009.
  • 5KLAREN D G. Fluidized bed heat exchanger: a new approach in severe fouling heat transfer [ J ]. Resources and Conservation,1981,7:301-314.
  • 6KOLLBACH J St, DAHM W, RAUTENBACH R. Continuous cleaning of heat exchanger with circulating fluidized bed [ J ]. Heat Transfer Engineering, 1987,8 ( 4 ) :26-34.
  • 7RAUBENTACH R, ERDMANN C, KOLLBACH J St. The fluidized bed technique in the evaporation of wastewaters with fouling/scaling potential-lasted development, applications limitations [ J ]. Desalization, 1991,81 ( 1/2/3 ) :285-298.
  • 8MAHARAJ L, POCOCK L, LOVEDAY B K. The effect of distributor configuration on the hydrodynamics of the teetered bed separator [ J ]. Minerals Engineering, 2007, 20( 11 ) : 1089-1098.
  • 9TAGHIPOUR F, ELLIS N, WONG C. Experimental and computational study of gas-solid fluidized bed hydrodynamics [ J ]. Chemical Engineering Science, 2005,60 (24) :6857-6867.
  • 10Jia X, Wedlock D J, Williams R A. Simulation of Simultaneous Ag- gregation and Sedimentation [ J ]. Minerals Engineering, 2000, 13 (13) :1349-1360.

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部