期刊文献+

Deformation Behavior of Ultra-low Carbon Steel in Ferrite Region during Warm Processing

Deformation Behavior of Ultra-low Carbon Steel in Ferrite Region during Warm Processing
下载PDF
导出
摘要 在铁酸盐范围的极端低的碳钢的热变丑实验在一个热模拟器被执行以便在低温度在铁酸盐范围研究极端低的碳钢的热变丑行为。结果证明流动应力上的变丑参数的影响对在奥氏体的变丑的那些不同。变丑特征参数在铁酸盐区域为极端低的碳钢被计算。为在在低温度的以铁酸盐为主要成的变丑的极端低的碳钢的流动压力方程被获得。 The hot deformation experiments of ultra-low carbon steel in ferrite range were carried out in a hot simulator in order to research hot deformation behaviors of ultra-low carbon steel in ferrite range at low temperature. The results show that the influences of deformation parameters on flow stress are different to those in austenitic deformation. The deformation characteristic parameters were calculated for ultra-low carbon steel in ferrite region. The flow stress equation for ultra-low carbon steel in ferritic deformation at low temperature was obtained.
作者 徐光
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第1期29-32,共4页 武汉理工大学学报(材料科学英文版)
基金 the Education Bureau of Hubei Province of China(No.2002A01013)
关键词 超低碳钢 热处理 变形行为 铁素体 ultra-low carbon steel warm processing deformation flow stress equation
  • 相关文献

参考文献13

  • 1张红钢,张辉,刘婉容,林启权,林高用,彭大署.C194铜合金热压缩变形流变应力[J].湘潭大学自然科学学报,2003,25(3):82-86. 被引量:22
  • 2王昭东,何晓明,赵昆,张丕军,李自刚,刘相华,王国栋.Ti-IF钢铁素体区热变形行为研究和Zener-Hollomen参数方程的建立[J].材料科学与工艺,2000,8(4):6-10. 被引量:15
  • 3魏岩,王昭东,韩冰,崔光洙,刘相华,王国栋.NbTi微合金钢奥氏体高温变形行为[J].东北大学学报(自然科学版),1997,18(2):165-168. 被引量:13
  • 4A. Najafi-Zadeh,J. J. Jonas,S. Yue.Grain refinement by dynamic recrystallization during the simulated warm-rolling of interstitial free steels[J].Metallurgical Transactions A.1992(9)
  • 5C Zener,and J Hollomon.Effect of Strain Rate Upon Plastic Flow of Steel[].Journal of Applied Physics.1944
  • 6A Laasraoui,and J J Jonas.Modelling the Effect of Carbon Content on Hot Strength of Steels[].Metallurgical and Materials Transactions.1991
  • 7K Yu,,W X Li,R C Wang,et al.Hot Compressive Deformation Simulation of Mg-5.6Zn-0.7Zr-0.SNd Alloy at Elevated Temperature[].Acta Metallurgiea Siniea.2003
  • 8Barnett M R,Jonas J J.Distinctive Aspects of the PhysicalMetallurgy of Warm Rolling[].ISIJ International.1999
  • 9ZHANG Hong-gang,ZHANG Hui,PENG Da-shu. LIN Qi-quan (School of Materials Science and Engineeringi Central South Univenilv,Changsha 410083 China) School of Materials Science and Engineering,Hunan University,Changsha 410082 China School of Mechanical E.Rheologic Stress of C194 Copper Alloy Under Hot Compression Deformation[].Natural Science Journal of Xiangtan University.2003
  • 10Huang C,Hawbolt E B,Chen X,et al.Flow stress modeling and warm rolling simulation behavior of two Ti-Nb interstitial-free steels in the ferrite region[].Acta Materialia.2001

二级参考文献6

  • 1关德林.晶体的高温塑性变形[M].,1989.24-85.
  • 2王碧文 王涛.电子工业用铜和铜合金现状与展望[A].中国有色金属加工工业协会中国电子材料行业协会.电子工业用铜合金材料研讨会文集[C].北京,2002..
  • 3马莒生.引线框架材料发展的趋势[A].中国有色金属加工工业协会中国电子材料行业协会.电子工业用铜合金材料研讨会文集[C].北京,2002.47.
  • 4Zener C, Hollomon J H. Effect of strain - rate upon the plastic flow of steel[J]. J Appl Phys, 194.4, 15( 1 ) :22.
  • 5Wong W A, Jonas J J. Aluminium Extrusion as a thermally activated process[J]. Trans, AIME, 1968,242:2 271.
  • 6曹育文,马莒生,唐祥云,王碧文,王世民,李红.QFe2.5型引线框架用铜合金热处理工艺研究[J].金属热处理学报,1998,19(4):32-37. 被引量:20

共引文献47

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部