摘要
ADC12铝合金用机械搅拌方法进行加工能细化晶粒,获得半固态铝合金坯料;本文通过改变搅拌时间制备半固态铝合金,并观察其微观组织、检测其硬度,以寻求最佳的搅拌时间工艺参数取值范围。对试验结果分析后得出:在搅拌温度为580℃、搅拌速度330r/min,固定不变时,搅拌时间25min左右半固态铝合金的金相组织和硬度为最佳。
The semisolid ADC12 aluminum alloy blank is prepared by using mechanical agitation method of which the best agitation time has been looked for by changing mixing time and observation of the microstructure and test of hardness of specimen,Analysis of test results showed that optimal microstructure and hardness of semisolid AI alloy had been obtained under conditions that at 580℃ with fixed agltating rate 330r/min,for a time of 25min or so.
出处
《中国铸造装备与技术》
CAS
2008年第1期21-22,共2页
China Foundry Machinery & Technology
基金
江西省工业攻关资助项目[2005]132
南昌市新技术推广资助项目[2006]125
关键词
半固态铝合金
微观组织
硬度
Semisolld AI alloy, Microstructure, Hardness