期刊文献+

Performance and Internal Flow of Sirocco Fan Using Contra-Rotating Rotors 被引量:2

Performance and Internal Flow of Sirocco Fan Using Contra-Rotating Rotors
原文传递
导出
摘要 A sirocco fan using contra-rotating rotors in which an inner rotor is settled inside the sirocco fan rotor and each rotor rotates in an opposite direction was proposed for the purpose of getting the higher pressure and making the structure of a sirocco fan more compact. If the high discharge pressure is obtained with the adoption of the contra-rotating rotors, it could be used for various purposes. Pressure coefficient of a sirocco fan with contra-rotating rotors is 2.5 times as high as the conventional sirocco fan and the maximum efficiency point of contra-rotating rotors shifts to larger flow rate than a conventional sirocco fan. On the other hand, it was clarified from the flow measurement results that circumferential velocity component at the outlet of the outer rotor of contra-rotating ro- tors becomes larger than a conventional one. In the present paper, the performance of a conventional sirocco fan and a sirocco fan with contra-rotating rotors are shown and the internal flow field at the outlet of outer rotor of both cases is clarified. Then, the effect of different kind of contra-rotating rotors on the performance and internal flow field is investigated and the rotor design with higher performance would be discussed.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2008年第1期35-41,共7页 热科学学报(英文版)
关键词 Sirocco fan High pressure Contra-rotating rotors Slow angle Circular arc blade Aerofoil blade 热能排风机 高压力 旋转式喷灌器 低角度 环形弧度浆叶
  • 相关文献

参考文献6

  • 1Mech.Eng.Manual.Mech.Eng.Manual[].Fluid Machinery.1986
  • 2Cau,G. e. al.Measurements of Primary and Secondary Flows in an Industrial Forward-Curved Centrifugal Fan[].Journal of Fluids Engineering Transactions of the ASME.1987
  • 3Valarde-Suarez,S. e. al.Unsteady Flow Pattern Characteristics Downstream of a Forward-Curved Blades Centrifugal Fan[].Journal of Fluids Engineering Transactions of the ASME.2001
  • 4Kim,K. e. al.Shape Optimization of Forward-Curved-Blade Centrifugal Fan with Navier-Stokes Analysis[].Journal of Fluids Engineering Transactions of the ASME.2004
  • 5Uchiyama,H. e. al.Optimization Design on Centrifugal Fan with High Discharge Pressure for Burner Use[].Trans Jpn Soc Mech Eng (in Japanese).1990
  • 6Fukutomi,J. e. al.A Study of Sirocco Fan with Eccentric Inlet Nozzle[].Trans Jpn Soc Mech Eng (in Japanese).1999

同被引文献4

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部