期刊文献+

自动跟踪补偿消弧装置在电力系统的应用 被引量:3

The application of automatic tracking compensation arc extinguishing device in power system
原文传递
导出
摘要 电力系统10~35kV系统多采用中性点不直接接地方式。随着城市电网建设规模的迅速发展,变电站的电力电缆出线越来越多,导致电网单相接地电容电流不断增大。系统发生单相接地故障时,电容电流大,接地点电弧不易熄灭产生弧光过电压,引发电力系统事故。中性点经消弧线圈接地,补偿了接地电容电流,限制弧光接地过电压,保证电网供电可靠性和电网的安全。采用自动跟踪补偿后,能实时适应负荷线路接地的变化实现高精度、快速可靠的自动调节。 10~35kV power system mainly adopts neutral point undirected earthing. With the progress of city power grid, the numbers of outgoing lines from the substation is increased greatly, which results continuous increasing of power capacity and current of single phase earthing. When the system's single earthing fails, because power capacity and current is greater, the arc is hard to be extinguished and arc over-voltage may cause power system failure. But neutral point is earthed by arc coil, which compensates earthing power capacity and current, restricts arc earthing over-voltage and ensure safety and reliability of operation of power system. The adoption of auto-tracking compensation, automatic regulation of earthing for different loads is realized in a accurate and rapid way.
作者 李勇
机构地区 昆明供电局
出处 《云南水电技术》 2007年第4期60-61,67,共3页
关键词 自动跟踪补偿 消弧线圈 电力系统 变电站 automatic tracking compensation arc suppression coil
  • 相关文献

同被引文献18

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部