摘要
研究了PECVD腔内压力、淀积温度和淀积时间等工艺条件对SiO2薄膜的结构、淀积速率和抗腐蚀性等性能的影响。结果表明,利用剥离工艺,并采用AZ5214E光刻胶作为剥离掩模成功制作了约2μm厚的包裹在金属铝柱周围的SiO2隔热掩模。
The silicon oxide thin films are deposited on Silicon substrate by PECVD. The influence of the process parameters such as temperature, reactant and time on the quality, deposited rate and etchant - resistant characteristics of the silicon oxide thin films are discussed. The experimental result indicates that 2μm- thick silicon oxide adiabatic films can be prepared successfully by using lift - off technology with AZ5214E photoresist lift- off mask ,which is wrapped around the aluminum pillar.
出处
《功能材料与器件学报》
CAS
CSCD
北大核心
2008年第1期33-37,共5页
Journal of Functional Materials and Devices