摘要
以直线-共轭内啮合齿轮副为研究对象,对直线-共轭内啮合齿轮副的啮合特性进行了系统研究,得到了直线-共轭内啮合齿轮泵转子的较完整的设计方法.介绍了这种泵的工作原理,并综合齿轮及齿轮泵的设计计算方法,分析了直线-共轭内啮合齿形的基本参数和计算公式,给出了基本参数的选取和计算方法,推导了流量计算方程;利用平面啮合定理(Willis定理)和齿廓设计基本方法,分别得到了内、外齿轮的齿廓曲线方程.通过实例,求得其基本参数及齿廓曲线方程,并绘制出直线-共轭齿轮泵转子的图形,验证了基本参数和计算公式的合理性及齿廓曲线方程的正确性.
The straight conjugate internal gear pairs were studied, their meshing characteristics were analyzed and an integrated design method of their rotors was obtained. The selection and calculation of basic parameters were introduced, and the basic parameters and formulas were analyzed. The flow calculation equations were derived by integrating the gear pump design method with the working principle. The tooth profile equations were obtained according to the Willis theorem and the basic method of tooth profile design. Using an actual design example, the basic parameters and tooth profile equations were obtained, the rotor graphs were plotted, and the rationality and the validity of equations were verified.
出处
《排灌机械》
2008年第1期33-36,共4页
Drainage and Irrigation Machinery
基金
江苏省教育厅高校高新技术产业项目(JH03-033)
关键词
齿轮泵
直线-共轭
内啮合
参数
齿廓曲线方程
设计方法
gear pump
straight-conjugate
internal meshing
parameters
profile formula
design method
