期刊文献+

胶印专色油墨配色的研究 被引量:3

Study of Color Matching of the Offset Spot Ink
下载PDF
导出
摘要 在修正纽介堡方程基础上,将三刺激值配色法和光谱配色法相结合(简称"激谱配色法")对胶印专色油墨配色进行了理论与实验研究。根据网点扩大量修正法和指数修正法对纽介堡方程进行了修正,由三刺激值配色法和最小二乘法建立了配色的目标函数,通过求解函数的最小值得到油墨配方。实验结果表明,激谱配色法在进行配色计算时能满足实际配色的要求。 The offset spot ink color matching was studied in theory and practice by combining the tri- stimulus color matching and spectrophotometric color matching based on modified Neugebauer equation. The spectral model of Neugebauer equation was modified by means of dot gain values method and modified coeffi-cients method. The function is established according to the principle of tri-stimulus color matching and the least squares. The ink formulation was obtained by calculating the minimum value of equation. Experimental results indicated that the spectrophotometric color matching method can satisfy the demand of practical color matching.
作者 亓辉 刘昕
出处 《包装工程》 CAS CSCD 北大核心 2008年第3期72-74,77,共4页 Packaging Engineering
关键词 胶印 专色 激谱配色法 offset spot color spectrophotometric color matching
  • 相关文献

参考文献10

  • 1陈亚雄,金澜.一种基于分光测色的印刷油墨配色数学模型[J].北京印刷学院学报,1998(2):21-25. 被引量:3
  • 2刘俊杰.胶版印刷专色油墨的计算机配色方法[D].西安:西安理工大学,2004.
  • 3高虎.塑料凹印专色油墨计算机配色的研究[D].西安:西安理工大学,2005.
  • 4刘浩学,袁宇霞,杨文杰.纽介堡方程的网点扩大量修正法[J].北京印刷学院学报,1999,7(4):19-23. 被引量:7
  • 5杨力 崔元日 刘真 等.Neugebauer方程组修正系数的确定方法[J].解放军测绘学院学报,1996,(3).
  • 6NEUGEBAUER H E J. Die Theoretischen Giundlagen Des Mehrfarbendrucks [ J ]. Zeitschrift Fuer Wissenschaftliche Photographie, 1937, (36) :36 -73.
  • 7HERSCH Roger David, et al. Improving the Yule - nielsen Modified Spectral Neugebauer Model by Dot Surface Coverages Depending on the Ink Superposition Conditions [ C ]//IS&T/SPIE Electronic Imaging Symposium, Conf. Imaging X: Processing, Hardcopy and Applications ,2005,5667:434 -445.
  • 8饶俊.浅谈三刺激值匹配法在计算机配色中的应用[J].天津纺织科技,2004,42(1):18-19. 被引量:9
  • 9王喜昌,周丰昆,禹秉熙,龙科慧.三刺激值配色和全光谱配色的比较[J].光学精密工程,1999,7(2):13-16. 被引量:18
  • 10汪荣鑫.数理统计[M].西安:西安交通大学出版社,2002.122-168.

共引文献49

同被引文献13

引证文献3

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部