火控随动系统模拟器设计

Design of Fire Power Control and Servo System Simulator

一种火控随动系统模拟器,由火控仿真、随动信号发生、时钟、通信、其它功能等模块,以及显示器与键盘组成。软件采用Visual C++6.0开发,系统外部与随动系统以网络为总线,通过以太网接口与接口机连接,与武器随动系统实现交互,时统信号系统以RS485电平方式输出至接口机。同时,火控随动仿真模拟系统向武器随动系统提供20ms与1ms的时统信号及24VDC电源,以实现系统各部分功能。

The fire power control and servo system simulator consists of modules on fire power simulation, servo signal creating, clock, communication, other functions, along with displayer and keyboard. Its software is developed by Visual C＋＋6.0. The system exterior and servo system adopt network as bus, connect with interface apparatus by Ethernet interface, and realize alternation with weapon servo system. The time unit signal system adopts RS485 electric level to output to interface apparatus. At the same time, the fire power servo simulation system provides weapon servo system with 20ms and lms time unit signal and 24VDC power to realize system functions.