期刊文献+

切换机制下的宽带码多分址系统接纳控制方法

Call admission control method based on handoff call for power controlled WCDMA system
下载PDF
导出
摘要 为了使功率控制系统在接近满负荷运转时能够满足切换呼叫所要求的带宽,以增加整体呼叫接纳概率,提出了基于切换降级的接纳控制方法。切换呼叫和新呼叫共享系统信道,当系统无空闲信道时,新呼叫被阻塞而切换呼叫则可进行降级处理。仿真结果证明:加入降级机制的方法可增加切换用户数,也提高了系统在线用户量,降低了呼叫阻塞概率。 Aimed at making the power control system running at almost full capacity to meet the requirements of the handoff call' s bandwidth so as to increase a call overall access probability, the paper introduces the Wideband Code Division Multiple Access system, based on the handoff degradation control method. Handoff calls share channels with new calls in such a way that if the new call is blocked when there is no free channel in the system, the handoff call is subjected to degradation. The simulation results prove that the degradation method results in the increase not only in the number of handoff users, but also in the number of system online users, thus lowering the call blocking probability.
出处 《黑龙江科技学院学报》 CAS 2008年第1期21-23,共3页 Journal of Heilongjiang Institute of Science and Technology
关键词 宽带码分多址 切换降级 功率控制 呼叫接纳控制 WCDMA ( wideband code division multiple access) handoff degradation power control call admission control
  • 相关文献

参考文献5

  • 1HOLMA H, TOSKALA A. WCDMA for UMTS[ C ]//John Wiley & Sons,Ltd. 2001 Proc. of IEEE VTC,2001.
  • 2IMRE S, HANKO K, PETRAS P, et al. Efficient call admission control method for 3 G/4 G WCDMA networks[ C]//Prec. of 7th International Conference on Telecommunications-ConTel 2003, Zagreb, Croatia,2003.
  • 3ZHUGE LEI, LI VICTOR O K. Interference estimation for admission control in multi-service DS-CDMA cellular systems [ C ]//Globecom' 2000,2000.
  • 4HUANG CHINGYAO, YATES ROY D. Call admission in power control CDMA systems[ C ]//VTC' 96,1996.
  • 5WHA S J, DONG G J. Call admission control for CDMA mobile communications systems supporting multimedia services [ J ]. IEEE Transactions on Wireless Communcations ,2002, 1 (4) : 649 - 659.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部