铜、锌、铅火法冶金现状及21世纪初展望
被引量:4
摘要
本文简述了铜、锌、铅火法冶金的现状和新的火法冶金过程,并展望了21世纪初的发展前景。
出处
《上海有色金属》
CAS
1997年第3期135-141,共7页
Shanghai Nonferrous Metals
同被引文献33
-
1王忠实.我国重有色金属冶炼行业的近况与思考[J].矿业研究与开发,2003,23(S1):36-39. 被引量:1
-
2覃文胜.软锰矿和黄铁矿在硫酸介质中的浸出[J].矿冶工程,1993,13(4):52-56. 被引量:15
-
3梁兵.湿法氯化方铅矿提取铅盐和单质硫的研究[J].新疆大学学报(自然科学版),1995,12(4):58-61. 被引量:1
-
4徐爱明 宗复凡.传统法炼铅技改方案的探讨[J].有色矿冶,1996,(3):2-6.
-
5陈家镛.湿法冶金的研究与进展[M].北京:冶金工业出版社,1995.10-11.
-
6D. Grimanelis, etal, Leaching of a rich Greek manganese ore by aqueous solution of sulphar dioxide[ J]. Hydrometallurgy, 1992, (3) :139 - 146.
-
7Holmes, P. R. , Crundwell, F.K. Kinetic aspects of galvanic interactions between minerals during dissolution [ J ].Hydrometallurgy, 1995,39( 1 - 3) :353 - 375.
-
8Hall, G.E.M.; Vaive, J.E. , Beer, R. Hoashi, M. Selective leaches revisited, with emphasis on the amorphous Fe oxyhydroxide phase extraction[J]. Journal of Geechemical Exploration, 1996,56 ( 1 ) :59 - 78.
-
9Bang, Sookie S. Deshpande, Sandeep S. Han, Kenneth N. The oxidation of galena using Thiobacillus ferrooxidans [J] Hydrometallurgy, 1995,37 (2): 181 - 192.
-
10Balaz, P. Influence of solid state properties on ferric chloride leaching of mechanically activated galena [ J ]. Hydrometallurgy, 1996,40(3 ) :359 - 368.
引证文献4
-
1徐本军,覃文庆,邱冠周.方铅矿和软锰矿两矿法浸出工艺的研究[J].矿产保护与利用,2005,25(3):29-33. 被引量:13
-
2徐本军,覃文庆,邱冠周,蔡春林.用方铅矿精矿直接湿法制备电池材料硫酸铅[J].湿法冶金,2005,24(3):135-138. 被引量:3
-
3王兵,李育彪,张世鹏,罗立群.机械活化黄铜矿浸出动力学研究[J].中国矿业,2018,27(2):136-140. 被引量:7
-
4朱子宗,沈勇玲,乔胜普.用铁浴法分离高炉炉尘中的铅和锌[J].钢铁研究学报,2002,14(6):1-5. 被引量:5
二级引证文献28
-
1王涛,陈伟庆,梁君,朱立新,郭汉杰.高炉粉尘造泡沫渣过程中FeO还原动力学的研究[J].钢铁研究学报,2004,16(4):25-28. 被引量:1
-
2白仕平,张丙怀,伍成波,贾国利.高炉瓦斯泥高效利用的实验研究[J].中国冶金,2007,17(6):40-44. 被引量:11
-
3向平,冯其明,钮因健,刘伟琪.硫化铅还原硫酸浸出锌电解阳极泥中二氧化锰的试验研究[J].湖南有色金属,2010,26(1):19-23. 被引量:5
-
4向平,冯其明,钮因健,肖功明,刘伟琪.硫化铅还原硫酸浸出锌电解阳极泥中二氧化锰的试验研究[J].江西有色金属,2010,24(3):92-96.
-
5刘国伟,夏星,潘炳,曾子高,肖松文.金精矿/软锰矿联合浸出提取金、锰工艺研究[J].矿冶工程,2010,30(6):81-84. 被引量:5
-
6廖立兵.我国矿物功能材料研究的新进展[J].硅酸盐学报,2011,39(9):1523-1530. 被引量:7
-
7湛雪辉,李朝辉,湛含辉,李飞,曹芬,李侠.臭氧?过氧化氢联合浸出方铅矿[J].中南大学学报(自然科学版),2012,43(5):1651-1655. 被引量:11
-
8李朝辉,湛雪辉,彭三军,李飞,曹芬,李侠.二氧化锰浸出方铅矿工艺条件的正交法优化[J].矿冶工程,2012,32(3):75-77.
-
9黄侣义.踝关节骨折66例手术治疗分析[J].广西医科大学学报,2000,17(2):320-321.
-
10湛雪辉,李朝辉,湛含辉,李飞,曹芬,李侠,周随安.盐酸体系中二氧化锰浸出方铅矿的研究[J].中南大学学报(自然科学版),2012,43(6):2084-2088. 被引量:2
-
1武振廷.直流电弧炉及其在我国的发展前景[J].特殊钢,1991,12(3):40-45. 被引量:1
-
2何焕华.冶金过程回收率的理论计算[J].有色冶炼,1992,21(4):55-57.
-
3李扬洲,杨素波,陈渝,董艳华.冶金过程脱硫成本分析[J].钢铁钒钛,1996,17(1):64-68.
-
4张赋明.国外铅锌冶炼技术的进展与发展前景[J].世界有色金属,1990(1):10-13.
-
5刘世坚.镁碳砖生产使用与发展前景[J].黑龙江冶金,1997(3):41-45.
-
6王君天.杭钢转炉与电炉冶炼特殊钢的对比研究[J].浙江冶金,2016(1):34-37.
-
7Schulz,E,林国庆.现代冶金生产过程的工艺状况和发展前景[J].湘钢译丛,1993(1):1-11.
-
8Teoh,LL,王明斌.小型钢厂的发展前景[J].湘钢译丛,1998(3):47-51.
-
9钟崇武,况百梁,侯兴.新钢炼铁技术发展的回顾及展望[J].炼铁,2001,20(5):22-26.
-
10郭廷杰.直流电弧炉节电技术简介[J].山西能源与节能,1996(1):2-6. 被引量:1