期刊文献+

组合节点端板连接节点高温性能的研究现状与前景 被引量:5

A Review of Research on End-Plate Composite Joint Behavior in Fire
下载PDF
导出
摘要 对高温下钢-混凝土梁柱端板连接节点的研究现状做了较全面的综述。近年来随着组合结构在土木工程中不断地推广应用,高温下构件、节点、结构体系的耐火性能成为组合结构抗火研究的重点。一些高温试验、有限元软件数值模拟的建立、理论模型成为近几年来的主要研究手段。但在现有的研究中,对一些影响参数和节点处于各种应力状态下的受力性能仍然没有做合适的考虑,这些因素将导致理论存在一定的误差,因此有必要进行更为深入的理论研究。 This paper presents a review of recent studies on the behavior of beam-to-column composite joints in fire. Along with the widely application of composite structures, the fire resistance research of composite structure focuses on its structural members, connections and the structure as a whole. Several experiments at elevated temperatures, finite element simulation and theoretic model of joint became the main research means. But there are till some important points that haven't been properly considered, such as the accumulative effects on joints, and a number of factors which could greatly influence the whole joint behavior theoretically. It is necessary to carry out an in-depth study.
出处 《结构工程师》 2008年第1期82-87,95,共7页 Structural Engineers
关键词 组合结构 弹簧模型 M-θ关系模型 梁柱节点 composite structure, spring modeling, M-θ relationship model, beam-to-column joint
  • 相关文献

参考文献28

  • 1Boreman J, Kirby P A, Davison J B. Cardington steel frame building: tests on nine additional isolated bare steel connections [ R]. Preliminary Report to BRE, Department of Civil and Structural Engineering, University of Sheffield, UK,1995.
  • 2Thomas I R, Bennetts I D, Dayawansa P. Fire tests of the 140 William Street Office Building[ R]. Rep. No. BHPR/ENGr/92/043/SG2C. BHP, ResearchMelbourne Laboratories Melbourne, 1992.
  • 3Lawson R M. Behavior of Steel Beam-to-Column connections in Fire [ J ]. Structural Engineer, 1990, 68 (14), 263-271.
  • 4Leston-Jones L C,Burgess I W, Lennon T, et al. Elevated-temperature moment-ratation tests on steelwork connections[ R]. Proc. Instn Civ. Engrs Structs & Bldgs. 1997, 122, 410-419.
  • 5Al-Jabria K S, Burgessb I W, Lennonc T, et al. Moment-rotation-temperature curves for semi-rigid joints [J]. Journal of Constructional Steel Research,2005, 61:281-303.
  • 6A Newman G M, Robinson J T & Bailey C G. Fire safety design: A new approach to multi-storey steelframed buildings [ R]. SCI Publication P288,2000.
  • 7Liu T C H,Fahad M K,Davies J M. Experimental investigation of Behaviour of Axially Restrained Steel Beams in Fire [ J]. Journal of Constructional Steel Research ,2002,58 : 1211-1230.
  • 8Al-Jabri K S, Seibi A, Karrech A. Modelling of Unstiffened Flush End-plate Bolted Connections in Fire [ J]. Journal of Constructional Steel Research,2006, 62:151-159.
  • 9Spyros Spyrou, Buick Davison Ian Byrgess Roger Plabj. Experimental and Analytical Studies of Steel Joint Components at Elevated Temperatures [ J ]. Structures in Fire,Christchurch, 2002.
  • 10Al-Jabria K S, Burgessb I W, Plank R J. Prediction of the degradation of connection characteristics at elevated temperature[J]. Journal of Constructional Steel Research, 2004,60 : 771-781.

二级参考文献120

  • 1[1]American Institute of Steel Structures Construction (AISC).Specification for Structural Steel Buildings-Allowable Stress Design and Plastic Design (ASD),Chicago,IL.1989.
  • 2[2]American Institute of Steel Structures Construction (AISC).Load and Resistance Factor Design Specification for Structural Steel Buildings (LRFD),Chicago,IL.1999.
  • 3[3]Bjorhovde,R.,Colson,A.and Brozzetti,J.Classification system for beam-to-column connections,Journal of Structural Engineering,ASCE,1990,116(11),3059-3076.
  • 4[4]European Committee for Standardization (CEN).Eurocode 3,Design of Steel Structures:Part 1.1 General Rules and Rules for Buildings,ENV 1993-1-1.
  • 5[5]European Committee for Standardization (CEN).Eurocode 3,Design of Steel Structures,Part 1.8:Design of Joints,prEN 1993-1-8,2003.
  • 6[6]Nethercot,D.A.,Li,T.Q.and Ahmed,B..Unified classification system for beam-to-column connections,Journal of Constructional Steel Research,1998,45(1),39-65.
  • 7[7]Nethercot,D.A.,Li,T.Q.and Choo,B.S.Required rotations and moment redistribution for composite and continuous beams,Journal of constructional steel research,1995,35(2),121-163.
  • 8[8]Li,T.Q.,Choo,B.S.and Nethercot,D.A.Determination of rotation capacity requirements for steel composite beams,Journal of constructional steel research,1995,32,303-332.
  • 9[9]Goto,Y.and Miyashita,S.Validity of classification system of semirigid connections,Engineering Structures,1995,17(8),44-553.
  • 10[10]Kishi,N.,Hasan,R.,Chen,W.F.and Goto,Y.Study of Eurocode 3 steel connection classification,Engineering Structures,1997,19(9),772-779.

共引文献37

同被引文献46

  • 1谢猛,肖建庄.混凝土结构抗火理论研究述评[J].结构工程师,2005,21(1):57-61. 被引量:10
  • 2丁发兴,余志武,温海林.高温后Q235钢材力学性能试验研究[J].建筑材料学报,2006,9(2):245-249. 被引量:77
  • 3屈立军,王跃琴,李焕群.Q345低合金结构钢的高温强度试验研究[J].武警学院学报,2006,22(2):20-22. 被引量:6
  • 4李贤,肖岩,毛炜烽,安德森,周涛.钢筋混凝土柱-钢梁节点的抗震性能研究[J].湖南大学学报(自然科学版),2007,34(2):1-5. 被引量:27
  • 5Parra Montesinos G,Weight J K.Modeling shear be-havior of hybrid RCS beam-column colmections[J].Jounal of Structural Engineering,2001,127(1):3-11.
  • 6Gregory G Deierlein,Hiroshi Noguchi.Research onRC/SRC column systems[C].12WCEE,Auckland:1AEE,2000.
  • 7Miehael N Bugeja,Joseph M Bracci,Walter P MooreJr.Seismic behavior of composite RCS frame systems[J].Joumal of Structural Engineering,2000,126(4):429-435.
  • 8Xuemei,Gustavo J,Parra-Moniesinos.Seismic be-havior of reinforced concrete column-steel beam sub-assemblies and frame systems[J].Journal of Struc-tural Engineering,2004,130(2):310-319.
  • 9AIJ Composite RCS Structure Sub-Committee.AIJ de-sign guidelines for composite RCS joints[S],1994.
  • 10Gregory G Deierlein,Hiroshi Noguchi.Overview ofU.S.-Japan research on seismic design of compositereinforced concrete and steel moment frame[J].Journal of Structural Engineering,2004,130(2):361-367.

引证文献5

二级引证文献46

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部