期刊文献+

K60级管线钢低温断裂韧性分析 被引量:1

Analysis on Low-temperature Fracture Toughness of K60 Pipeline Steel
下载PDF
导出
摘要 以俄罗斯管线工程中采用的K60级管线钢为研究对象,通过-15℃落锤撕裂试验和-40℃夏比冲击试验对钢板的低温断裂韧性进行了系统的统计和分析。试验结果表明,随着壁厚的增加,K60级管线钢夏比冲击韧性变化不大,DWTT性能严重下降。指出,在大壁厚管线钢钢板生产中应着重注意DWTT性能的稳定性。 The China-Russia crude oil pipeline and Russia far east transportation pipeline project have provided precious chance for Chinese steel and pipeline enterprise to open the international market.This paper based on K60 pipeline steel,by means of DWTT and Charpy impact test,given an analysis on pipeline steel low-temperature fracture toughness.Result shows that with wall thickness increased,K60 pipeline steel get little change in charpy impact toughness,but the DWTT performance drop down badly,DWTT performance should be paid more attention in thick pipeline plates production.
出处 《焊管》 2008年第2期35-37,共3页 Welded Pipe and Tube
关键词 K60级管线钢 DWTT 断裂韧性 pipeline steel K60 DWTT fracture toughness
  • 相关文献

参考文献2

  • 1KONDO J. Design Concept and Mass Production of High Strength UOE Line Pipes[ C]//20th International Conference on Offshore Mechanics and Arctic Engineering. Brazil :OMEA,2001:159.
  • 2MOROZOV Y D,EFROM L I,MATROSOV Y I,et al.主干管线钢焊接模拟的对比分析[C]∥石油天然气管线工程技术发展、规范及焊接国际研讨会报告文集与论文选编.北京:中信微合金化技术中心,2006:159-169.

同被引文献7

  • 1机械工程导报编辑部.传统能源进行低碳发展的途径[J].机械工程导报,2010(5):3-5.
  • 2涂铭旌,鄢文彬.低合金钢脆性断裂论文集[D].西安:西安交通大学.1985.
  • 3Chuanglin F, Jinchuan H, Qiang Z, et al. The develop- ment status and strategy of the wind power industry in China[ C]. Proceedings of 2007 non - grid - connected wind power systems ,2007 : 170 - 181.
  • 4王相明.低温环境对风力发电机组的影响初探[R].新疆金风科技股份有限公司,2006.
  • 5Delarue E, Luickx P, Dhaeseleer W. The effect of im- plementing wind power on overall electricity generation costs, CO2 emissions and reliability[ C]. Proceedings of 2007 non - grid - connected wind power systems, 2007 : 446 - 458.
  • 6Shi C L, Hashida T, Takahashi H, et al. A study on fractography in the low - temperature brittle fracture of an 18 Cr - 18 Mn - 0.7 N Austenitic steel [ J ]. Metallur- gical And Materials Transcations A, 1998,29A : 791 - 797.
  • 7冀亚锋,张宏,毕宗岳,王晓光,鲜林云.连续油管材料临界CTOD值计算方法研究[J].焊管,2012,35(11):5-8. 被引量:4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部