期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

纳米CuO对3Y-PSZ陶瓷材料烧结与机械性能的影响 被引量：1

INFLUENCE OF NANO-CuO ADDITIVE ON SINTER ABILITY AND MECHANICAL PROPERTIES OF YTTRIA-PARTIALLY STABILIZED ZIRCONIA(Y-PSZ)
下载PDF
导出
摘要 研究了微量(0.7～0.15mol%)CuO添加剂对3Y-PSZ陶瓷材料烧结和机械性能的影响。适量添加CuO可以促进3Y-PSZ的烧结并提高材料力学性能。经1500℃下2h烧成,添加0.45mol%纳米CuO的试样具有最高的抗弯强度和断裂韧性,其值分别为620MPa和12.2MPam1/2,比同样条件制备的纯3Y-PSZ分别提高了38%和46%。 The effect of small amount of CuO additive on the densification and mechanical properties of 3Y-PSZ was investigated. It was founded that CuO additive enhanced both the densification and mechanical properties of 3Y-PSZ.The specimens doped with 0.45mol% nano - CuO sintered at 1500℃ for 2h obtained the maximum flexural strength of 620MPa and fracture toughness of 12.2MPam1/2, respectively. Compared with monolithic 3Y-PSZ, the flexural strength and fracture toughness was improved by 38% and 46%.
作者 刘阳 陈涵 郭露村
机构地区 南京工业大学材料科学与工程学院
出处 《中国陶瓷》 CAS CSCD 北大核心 2008年第4期15-17,共3页 China Ceramics
基金 江苏省自然科学基金招标项目(编号:BK2003004)
关键词 PSZ 添加剂 CUO 力学性能 PSZ, additive, CuO, mechanical property
分类号 TQ174.758 [化学工程—陶瓷工业] V51 [航空宇航科学与技术—航空宇航推进理论与工程]
  • 相关文献

参考文献9

  • 1N. Kimura, H. Okamura,etc, Preparation of Low Y2O3 TZP by Low Temperature Sintering,The American Ceramic Society, Columbus, OH, 1988,24:183-191
  • 2C.-M.J.Hwang,I.W.Chen. Effect of a Liquid Phase on Superplaticity of 2mol% Y2O3 Stabilized Tetragonal Zirconia Polycrystals. J.Am. Ceram. Soc. 1990, 73 (6) : 1626-32
  • 3S.Ramesh, C. Gill, Environmental degradation of CuO- doped Y-TZP ceramics, Ceramics International 2002,27:705-711
  • 4S.maschio,O.Sbaizero, S.Meriani, Sintering aids for ceria-zirconia alloys, J.Mater.Sci., 1992,27:2734-2738
  • 5S. Lawson, C. Gill, etc, The Effects of Copper and Iron Oxide Additions on the Sintering and Properties of Y-TZP, J. Mater. Sci., 1995,30(12):3057-3060
  • 6S.Ramesh, C.Gill, S.Lawson, The Effect of Copper Oxide on Sintering, Microstructure, Mechanical properties and Hydrothermal ageing of Coated 2.5Y-TZP ceramics, J.Mater.Sci., 1999,34:5457-5467
  • 7Ran, S., Winnubst, A. J. A., Wiratha, Synthesis, Sintering and Microstructure of 3Y-TZP/CuO Nano-Powder Composites, J. Eur. Ceram. Soc., 2006(26):391-396
  • 8Ran, S., Winnubst,etc,Sintering Behaviour and Microstructure of 3Y-TZP+8mol% CuO Nano Powder Composite,J.Eur. Ceram.Soc., 2007,27(2 - 3):683-687
  • 9陈涵,朱小芳,郭露村.纳米Al_2O_3对3Y-ZrO_2陶瓷性能的影响[J].中国陶瓷,2007,43(11):23-25. 被引量：4

二级参考文献14

  • 1陈守刚,尹衍升,周春华,赵同广.氧化锆相变稳定机制的研究进展及应用[J].硅酸盐通报,2004,23(3):73-76. 被引量：31
  • 2高家化,沈志坚,丁子上.陶瓷基纳米复合材料[J].复合材料学报,1994,11(1):1-7. 被引量：35
  • 3S.R.Choi, N.P.Bansal. Mechanical behavior of zirconia/alumina composites. Ceramics International, 2005, 31. 39- 46
  • 4L. Gremiliard, T. Epicier, J. Chevalier et al. Microstructural study of silica-doped zirconia ceramics. Acta Materialia, 2000, 48: 4647- 4652
  • 5G. A. Gogotsi. Mechanical Behaviour of Yttria- and Ferric Oxide-Doped Zirconia at Different Temperatures. Ceramics International, 1998, 24. 589 - 595
  • 6Y. Su-Yong, L. Joon-Hyung, K. Jeong-Joo et al. Sintering behavior of Y-doped ZrO2 ceramics: the effect of Al2O3 and Nb2O5 addition. Solid State Ionics, 2004, 172: 413- 416
  • 7N. Koichi. New Design Concept of Structural Ceramics---Ceramics Nanocomposites. Journal of Ceramic Society of Japan, 1991, 99:974 - 982
  • 8K.Takafumi, S. Tohru, C. Yong-Ho et al.Machinability of Silicon Nitride/Boron Nitride Nanocomposites. Journal of American Ceramic Society, 2002, 85 (11): 2689- 2695
  • 9Q.Jin-Yu, H. Yuji, W. Koji. Enhancement of Densification and Thermal Conductivity in AlN Ceramics by Addition of Nano-Sized Particles. Journal of American Ceramic Society. 2006.89(1):377-380
  • 10N. Liu, Y. D. Xu, H. Li. Effect of nano-mlcro TiN addition on the microstructure and mechanical properties of TiC based cermets. Journal of European Ceramic Society, 2002, (22). 2409 - 2414

共引文献3

同被引文献13

引证文献1

二级引证文献1

中国陶瓷
2008年 第4期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部