摘要
This paper presents a passive UHF radio frequency identification (RFID) transponder with 2k bit standard commercial EEPROM in compliance with the NCITS 256 protocol. The communication range is 1.5m for the read operation and 0.3m for the write operation with 4W effective isotropic radiated power (EIRP) at 915MHz. The integrated IC is implemented in SMIC 0.18μm EEPROM CMOS technology. The die size is 1mm × 1mm. The energy of the tag is harvested from RF electromagnetic waves transmitted by the reader with the help of a Schottky diode rectifier and achieves 25% power efficiency.
设计了一种符合NCITS 256协议的无源超高频射频识别标签.标签携带2kbit的标准商用EEPROM.在读卡器发射功率为915MHz 4W EIRP的情况下,芯片的读距离为1.5m,写距离为0.3m.芯片在SMIC 0.18μm EEPROM CMOS工艺下流片实现,面积为1mm×1mm.标签使用Dickson倍压电路从读卡器发射的电磁波中提取能量.Dickson倍压电路使用肖特基管实现,转换效率为25%.
基金
国家高技术研究发展计划资助项目(批准号:2006AA04A109)~~