期刊文献+

自动精密校直液压机系列化产品CAD集成系统 被引量:5

The Serial Products Integration CAD System of Automatic Hydraulic Precise Straightening Press
下载PDF
导出
摘要 以三维CAD特征造型软件为平台,采用参数化、模块化的设计思想研究开发了自动精密校直液压机系列化CAD集成系统。该系统采用高级编程语言为人机界面开发工具,以MicrosoftAccess软件为系统支撑数据库建立与三维模型的数据接口;并应用有限元分析软件对系统创建的机身进行强度分析。该集成系统能自动设计可用于生产加工的自动精密校直机成套工程图图纸。 Based on 3D CAD environment,theories of modularization and parametric 3D model were adopted to design 3D model of the automatic hydraulic precise straightening press.The human-computer interface of this system was developed by programming language and with the support of Microsoft Access database software,the interface between model and data was established.The stress of the bed was analyzed with ANSYS.This system can put out all the parts and assemble charts of the automatic hydraulic precise straightening press.
出处 《机床与液压》 北大核心 2008年第4期146-148,168,共4页 Machine Tool & Hydraulics
基金 安徽省十一.五重点科技攻关项目(项目编号:06012019A)
关键词 校直 液压机 参数化 模块化 Straightening Hydraulic press Parametric Modularization
  • 相关文献

参考文献2

二级参考文献4

  • 1钦明浩,柯尊忠,张向军,蒋守仁,徐业宜.精密矫直机中轴类零件矫直工艺理论研究[J].机械工程学报,1997,33(2):48-53. 被引量:60
  • 2J.B.马丁 余同希等(译).塑性力学--基础及其一般结果[M].北京:北京理工大学出版社,1990.121-129.
  • 3崔甫.矩直理论与参数计算[M].北京:机械工业出版社,1992.20-90.
  • 4A.M.马基斯列逊 等 西安重型机械研究所一室(译).管材矫直机[M].北京:机械工业出版社,1979.50-89.

共引文献22

同被引文献27

  • 1聂绍珉,赵希禄.液压机机架结构优化设计与HYSOP程序系统[J].锻压机械,1993,28(4):6-9. 被引量:1
  • 2李贵闪,何晓燕,荣兆杰.我国液压机行业的现状及发展[J].锻压装备与制造技术,2006,41(4):17-19. 被引量:36
  • 3翟华.轴类零件自动校直技术现状及发展趋势[J].重型机械,2007(4):1-5. 被引量:7
  • 4ASHLEY Steven. Rapid-response Design [ J ]. Mechanical Engineering-CIME, 1997 (12).
  • 5SINGH Nanua, DING S, JAGIRDAR R, et al. A Knowledge Engineering Framework for Rapid Design[ J]. Computers & Industrial Engineering, 1997,33 ( 1/2 ) : 345 - 348.
  • 6REYNERSON C M. Developing an Efficient Space System Rapid Design Center [ C ]/! Proceedings of 2001 IEEE Aerospace Conference, Piscataway, NJ,2000 : 3517 - 3522.
  • 7CHENG John G, SHAO Xin-Yu, CHEN Yubao, et al. Feature-based Part Modeling and Process Planning for Rapid Response Manufacturing[J]. Computers and Industrial Engineering, 1998,34(2) :515 - 530.
  • 8CHAPMAN Craig B, PINFOLD Martyn. The Application of a Knowledge Based Engineering Approach to the Rapid Design and Analysis of an Automotive Structure[ J]. Advances in Engineering Software,2001,32(12) :903 -912.
  • 9GIUSTO Paolo, DEMMELER Thilo. Rapid Design Exploration of Safety-critical Distributed Automotive Applications via Virtual Integration Platforms [ J ]. The Journal of Systems and Software ,2004,70(3 ) :245 - 262.
  • 10MCMANUS Hugh L,HASTINGS Daniel E,WARMKESSEL Joyce M. New Methods for Rapid Architecture Selection and Conceptual Design [ J ]. Journal of Spacecraft and Rockets, 2004,41(1) :10-19.

引证文献5

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部