期刊文献+

Fabrication of High-purity Ternary Carbide Ti_3AlC_2 by Spark Plasma Sintering(SPS)Technique 被引量:1

Fabrication of High-purity Ternary Carbide Ti_3AlC_2 by Spark Plasma Sintering(SPS)Technique
下载PDF
导出
摘要 The effect of silicon on synthesis of Ti3AlC2 by spark plasma sintering (SPS) from TiC/Ti/Al powders was investigated. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used for phase identification and microstructure evaluation. The results show that addition of silicon can considerably accelerate the synthesis reaction of Ti3AlC2 and fully dense, essentially single-phase (purity 〉98%) polycrystalline Ti3AlC2 could be successfully obtained by sintering 2TiC/lTi/lAl/0.2Si powders at 1 200- 1 250 ℃ under a pressure of 30 MPa. SEM photographs show that the obtained Ti3AlC2 samples from mixtures powders are in plane-shape with a size of about 2-5 μm and 10-25 μm in the thickness dimension and elongated dimension, respectively. The effect of silicon on synthesis of Ti3AlC2 by spark plasma sintering (SPS) from TiC/Ti/Al powders was investigated. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used for phase identification and microstructure evaluation. The results show that addition of silicon can considerably accelerate the synthesis reaction of Ti3AlC2 and fully dense, essentially single-phase (purity 〉98%) polycrystalline Ti3AlC2 could be successfully obtained by sintering 2TiC/lTi/lAl/0.2Si powders at 1 200- 1 250 ℃ under a pressure of 30 MPa. SEM photographs show that the obtained Ti3AlC2 samples from mixtures powders are in plane-shape with a size of about 2-5 μm and 10-25 μm in the thickness dimension and elongated dimension, respectively.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第2期177-180,共4页 武汉理工大学学报(材料科学英文版)
基金 the National Natural Science Foundation of China(No.50572080)
关键词 TI3ALC2 ceramics carbides microstructure layered structures Ti3AlC2 ceramics carbides microstructure layered structures
  • 相关文献

参考文献10

  • 1M W Barsoum.Phases:A New Class of Solids, Thermodynamically Stable Nanolaminates[].ProgSolidSt Chem.2000
  • 2J J Sun,J B Li,G L Sun,et al.Synthesis of Dense NiZn Ferrites by Spark Plasma Sintering[].Ceramics International.2002
  • 3L Gao,H Z Wang,et al.Fabrication of YAG-SiC Nanocom- posites by Spark Plasma Sintering[].JEuroCeramSoc.2002
  • 4A G Zhou,C A Wang,Y Huang.by Spark Plasma Sintering[].Journal of Materials Science.2003
  • 5J C Viala,N Peillon,F Bosselet,et al.Phase Equilibria at 1000℃in the Al-C-Si-Ti Quaternary System:an Experimental Approach[].Materials Science and Engineering.1997
  • 6Tzenov NV,Barsoum MW.[].Journal of the American Ceramic Society.2000
  • 7Pietzka M A,Schuster J. C.Summary of constitutional data on the aluminum-carbontitanium system[].Journal of Phase Equilibria.1994
  • 8MEI Bingchu,MIYAMOTO Yoshinari.AlC composites prepared by spark plasma sintering[].Journal of Materials Chemistry.2002
  • 9PAN W,CHEN L,OKUBO A,et al.Tough multilayered Si3N4 ceramics prepared by spark plasma sintering[].Materials Letters.2001
  • 10Perera D S,Tokita M,Moricca S.Comparative studyof fabrication of Si3N4/SiC composites by spark plasmasintering and hot isostatic pressing[].Journal of Eu-ropean Ceramic Society.1998

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部