期刊文献+

Microstructure and mechanical properties of railway wheels manufactured with low-medium carbon Si-Mn-Mo-V steel 被引量:2

Microstructure and mechanical properties of railway wheels manufactured with low-medium carbon Si-Mn-Mo-V steel
下载PDF
导出
摘要 The suitability of carbide-free bainite steel as railway wheel materials was investigated. The low-medium carbon Si-Mn- Mo-V steel was designed to make railway wheels by forging and rolling. The slack quenching with water was conducted on the tread of rim section by programmed control to simulate isothermal heat treatment after being austenitized. Microstructures and mechanical properties have been studied. The results indicate that the microstructure of the rim is mainly carbide-free bainite, and the mixed microstructure of bainitic ferrite and granular bainite is observed in web and hub. The mechanical properties are superior to both the standard requirements and the commercial production, such as CL60 plain carbon. The Charpy impact energy is relatively high at room and/or subzero temperatures. The force-displacement curves and fractographies reveal the excellent ability of resistance to crack initiation and propagation. The suitability of carbide-free bainite steel as railway wheel materials was investigated. The low-medium carbon Si-Mn- Mo-V steel was designed to make railway wheels by forging and rolling. The slack quenching with water was conducted on the tread of rim section by programmed control to simulate isothermal heat treatment after being austenitized. Microstructures and mechanical properties have been studied. The results indicate that the microstructure of the rim is mainly carbide-free bainite, and the mixed microstructure of bainitic ferrite and granular bainite is observed in web and hub. The mechanical properties are superior to both the standard requirements and the commercial production, such as CL60 plain carbon. The Charpy impact energy is relatively high at room and/or subzero temperatures. The force-displacement curves and fractographies reveal the excellent ability of resistance to crack initiation and propagation.
出处 《Journal of University of Science and Technology Beijing》 CSCD 2008年第2期125-131,共7页 北京科技大学学报(英文版)
基金 This work was financially supported by the Ministry of Railway of China the National High-Tech Research and Development Program of China (863 Program, No. 2003AA331160).
关键词 wheel steel carbide-free bainite MICROSTRUCTURE mechanical properties wheel steel carbide-free bainite microstructure mechanical properties
  • 相关文献

参考文献17

  • 1方鸿生,杨志刚,杨金波,白秉哲.钢中贝氏体相变机制的研究[J].金属学报,2005,41(5):449-457. 被引量:37
  • 2杨福宝,白秉哲,刘东雨,常开地,韦东远,方鸿生.无碳化物贝氏体/马氏体复相高强度钢的组织与性能[J].金属学报,2004,40(3):296-300. 被引量:40
  • 3S. S. Babu,E. D. Specht,S. A. David,E. Karapetrova,P. Zschack,M. Peet,H. K. D. H. Bhadeshia.In-situ observations of lattice parameter fluctuations in austenite and transformation to bainite[J].Metallurgical and Materials Transactions A.2005(12)
  • 4A. M. Streicher-Clarke,J. G. Speer,D. K. Matlock,D. L. Williamson,B. C. DeCooman.Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity sheet steel[J].Metallurgical and Materials Transactions A.2005(4)
  • 5U. P. Singh,A. M. Popli,D. K. Jain,B. Roy,S. Jha.Influence of microalloying on mechanical and metallurgical properties of wear resistant coach and wagon wheel steel[J].Journal of Materials Engineering and Performance.2003(5)
  • 6Z. X. Liu,H. C. Gu.Failure modes and materials performance of railway wheels[J].Journal of Materials Engineering and Performance.2000(5)
  • 7A. Zarei Hanzaki,P. D. Hodgson,S. Yue.Retained austenite characteristics in thermomechanically processed Si-Mn transformation-induced plasticity steels[J].Metallurgical and Materials Transactions A.1997(11)
  • 8A.M. Streicher-clarke,J.G. Speer,D.K. Matlock,and B.C. de Cooman.Analysis of lattice parameter changes follow- ing deformation of a 0.19C-1.63Si-1.59Mn transformation induced plasticity sheet steel[].Metallurgical and Materials Transactions.2005
  • 9Y.M. Zhou.Wheels an axles of Chinese railway locomo- tive and car meeting challenges of 21st century[].Pro- ceedings th International Wheelset Congress.1998
  • 10D.T. Tan.Present condition and future development of axles and wheels of Chinese railways[].Proceedings th Interntional Wheelset Congress.1998

二级参考文献33

  • 1方鸿生,李春明,王家军.Cu-Zn-Al合金贝氏体的初生态及三维台阶[J].金属学报,1993,29(9). 被引量:6
  • 2方鸿生,王家军,杨志刚,李春明,邓旭蕊,郑燕康,严隽珏,于洪滨,李志刚,黄刚.下贝氏体组织的扫描隧道显微镜研究[J].自然科学进展(国家重点实验室通讯),1993,3(6):525-528. 被引量:8
  • 3褚武扬.氢损伤和滞后断裂[M].北京:冶金工业出版社,1988..
  • 4Devenport E S, Bain E C. Trans Metall Soc AIME, 1930;90:117.
  • 5Hillert M. Scr Mater, 2002; 47: 137.
  • 6Hsu T Y, Mou Y W. Acta Metall, 1984; 32:1469.
  • 7Mou Y W, Hsu T Y. Metall Trans, 1988; 19A: 1695.
  • 8Hsu T Y. Metall Trans, 1990; 21A: 811.
  • 9Smith G V, Mehl R F. Trans AIME, 1942; 150:211.
  • 10Aaronson H I, Wells C. JOM, 1956; 8:1216.

共引文献74

同被引文献17

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部