期刊文献+

三股流高温紧凑板翅式换热器的性能分析 被引量:2

Performance Analysis of High Temperature Three-fluid Compact Heat Exchanger
下载PDF
导出
摘要 建立了三股流紧凑板翅式换热器的动态数学模型.在分布集总参数方法和容阻特性建模技术的基础上,建立了该紧凑板翅式换热器的仿真模型.所建模型详细考虑了流体物性沿换热器长度方向上的变化,能满足系统快速动态仿真的需要,并能反映分布参数特性.稳态特性表明,沿长度方向流体的密度、速度和热传导率变化幅度较大,比热容变化较小;动态特性表明,该换热器具有一定的惯性延迟时间,这将为控制系统的设计和优化提供参考. Three-fluid heat exchangers (TFHE) are widely used in petro-chemical, aerospace, and processing industries. Dynamic mathematical model of three-fluid compact offset plate fin heat exchanger was established. Based on the volume-resistance characteristic modeling technique, the distributed and lumped simulation model was completed. This model can not only satisfy the quick dynamic simulation, but also be used to investigate the distribution characters. The steady state results indicate that the fluid density, velocity and thermal conductivity have great change along the length direction except for the heat capacity. The dynamic results will provide reference for the design and optimization of TFHE control system.
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2008年第3期389-393,共5页 Journal of Shanghai Jiaotong University
基金 国家自然科学基金资助项目(50676061)
关键词 三股流换热器 板翅式 高温 容阻特性建模 性能 three-fluid heat exchanger (TFHE) plate-fin high temperature volume and resistance char-acteristic modeling performance
  • 相关文献

参考文献17

  • 1Luo X,Li M L,Roetzel W.A general solution for one-dimensional multistream heat exchangers and their networks[J].Int J Heat Mass Transfer,2002,45(13):2695-2705.
  • 2Shrivastava D,Ameel T A.Three-fluid heat exchangers with three thermal communications.Part A.General mathematical model[J].Int J Heat Mass Transfer,2004,47(17-18):3855-3865.
  • 3Yuan P.Effect of inlet flow maldistribution on the thermal performance of a three-fluid crossflow heat exchange[J].Int J Heat Mass Transfer,2003,46 (20):3777-3787.
  • 4Shrivastava D,Ameel T A.Three-fluid heat exchangers with three thermal communications.Part B:Effectiveness evaluation[J].Int J Heat Mass Transfer,2004,47(17-18):3867-3875.
  • 5Ghosh I,Sarangi S K,Das P K.An alternate algorithm for the analysis of multistream plate fin heat exchangers[J].Int J Heat Mass Transfer,2006,49 (17-18):2889-2902.
  • 6Picon-Nunez M,Polley G T,Medina-Flores M.Thermal design of multi-stream heat exchangers[J].Applied Thermal Engineering,2002,22(14):1643-1660.
  • 7Boehme R,Parise J A R,Pitanga M R.Simulation of multi-stream plate-fin beat exchangers of an air separation unit[J].Cryogenics,2003,43(6):325-334.
  • 8王礼进,张会生,翁史烈.高温紧凑板翅式换热器稳态和动态性能的研究[J].动力工程,2008,28(2):255-258. 被引量:4
  • 9Zhang H S,Weng S L,Su M.Dynamic modeling and simulation of distributed parameter heat exchanger[C]//ASME Turbo Expo.Nevada:ASME,2005:68293.
  • 10Tochon P,Mauget C,Pra F.The use of compact heat exchangers technologies for the HTRs reeuperator application per proper design[C]//2nd Interna-tional Topical Meeting on High Temperature Reactor Technology.Bejing:[s.n.],2004.

二级参考文献9

  • 1杜浦,徐益峰,李美玲,蔡祖恢.板翅式换热器动态特性的试验研究[J].华东工业大学学报,1996,18(1):27-32. 被引量:7
  • 2Patrice Tochon, Christian Mauget, Frank Pra. The use of compact heat exchangers technologies for the HTRs recuperator application per proper design[C].2^nd International Topical Meeting on High Temperature Reactor Technology. Bejing: China. September 22-24. 2004.
  • 3Boehme R, Parise J A R, Pitanga Marques R. Simulation of multi-stream plate-fin heat exchangers of anair separation unit[J]. Cryogenics, 2003,43:325 - 334.
  • 4Kays W M, London A L. Compact heat exchangers [M]. McGraw Hill, New York: Third Edition, 1984.
  • 5ALPEMA. The standards of the brazed aluminium plate-fin heat exchanger manufactures'association, Second Edition [M], 2000.
  • 6Huisheng ZHANG, Shilie WENG, Ming SU. Dynamic modeling and simulation of distributed parameter heat exchanger [J]. ASME TURBO EXPO, 2005.
  • 7Jan Schulte-Fischedich, Volker Dreigacker, Rainer Tamme. An innovative ceramic high temperature plate-fin heat exchanger for EFCC processes [J]. Applied Thermal Engineering, 2007,27 : 1285 - 1294.
  • 8Special Metals Cooperation. Product information brochure, http://www, specialmetals, com/documents/ Nimonic% 20alloy % 2090, pdf.
  • 9徐之平,卢玫,李凌,余敏,崔晓钰,章立新,杨茉.微型燃气轮机回热器[J].动力工程,2003,23(6):2752-2760. 被引量:16

共引文献3

同被引文献17

  • 1周光辉,张岑,刘寅,陈圣洁,张超.太阳能-空气复合热源热泵供热特性实验研究[J].湖南大学学报(自然科学版),2009,36(S2):19-21. 被引量:6
  • 2KOHTAKA I, YASUDA A, MORI T. Development, design and operation of large scale separate type heat pipe [C]// Proceedings of Of Sixth International Heat Pipe Conference, May 25-29, 1987, Grenoble, France. ES. 11 : IEEE, 1987:624.
  • 3NAVARRO H A, CABEZAS-GOMEZ L. A new approach for thermal performance calculation of crossflow heat exchangers[J].International Journal of Heat and Mass Transfer, 2005, 48(18): 3880-3888.
  • 4NOIE S H. Investigation of thermal performance of an air-to-air thermosyphon heat exchanger using ε-NTU method[J].Applied Thermal Engineering, 2006, 26 (5/6): 559-567.
  • 5CABEZAS-GOMEZ L, NAVARRO H A, SAIZJABARDO J M. Thermal performance of multipass parallel-and counter-- cross-flow heat exchangers[J].ASME J. Heat Transfer, 2007, 129(3):282- 290.
  • 6SAN J Y, LIN G S, PAI K L. Performance of a serpentine heat exchanger: part i-effectiveness and heat transfer characteristics[J]. Applied Thermal Engineering,2009, 29 (14/15) :3081- 3087.
  • 7KADYLAK D, CAVE P, MERIDA W, et al.Effectiveness correlations for heat and mass transfer in membrane humidifiers [J ]. International Journal of Heat and Mass Transfer, 2009, 52(5//6): 1504 -1509.
  • 8MATHEW B, HEGAB H effectiveness-NTU relationship Application of to parallel flow microchannel heat exchangers subjected to external heat transfer [J].International Journal of Thermal Sciences, 2010, 49(1):76 -85.
  • 9ABD EIBAKY M A A, MOHAMED M M. Heat pipe heat exchanger for heat recovery in air conditioning ( J 1. Applied Thermal Engineering,2007, 27 (4): 795-801.
  • 10WILLIS N C. Analysis of three fluid erossflow heat exchanger[D]. NASA, USA, 1966.

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部