期刊文献+

抄造条件对可逆温致变色防伪纸色差的影响 被引量:2

Effect of Papermaking Process on the Chromatic Aberration of Reversible Thermochromic Anti-counterfeiting Paper
下载PDF
导出
摘要 探讨了抄造条件对可逆温致变色防伪纸色差的影响。研究结果表明,当可逆温致变色材料的用量为0.6%左右时,防伪纸的色差便能强烈满足人的视觉要求;阔叶木浆比针叶木浆更有利于纸张色差的提高,且提高打浆度也能在一定程度上提高纸张的色差;填料的使用降低了防伪纸的色差,当填料用量由0增加至10%时,纸张色差降低34%;施胶导致纸张色差略有下降,但影响较小;在常用的助留体系中,传统的CPAM单元助留体系对可逆温致变色材料的留着效果最好。 The effect of papermaking process on the chromatic aberration of reversible thermochromic anti-counterfeiting paper was investigated. The results showed that 0.6% dosage (by wt) of reversible thermochromic capsules causes the chromatic observation which can be detected by the naked eyes; hardwood pulp is better than softwood in improving the chromatic aberration, and the chromatic aberration can also be improved by increasing the beating degree of the pulp. The chromatic aberration decreases 34% when PCC filler content increases from 0 to 10%. Sizing results in decreasing of the chromatic of aberration, but this effect is negligible. The retention agents can improve the efficiency of reversible thermochromic capsules, thus, improve the chromatic aberration of the paper.
出处 《中国造纸》 CAS 北大核心 2008年第5期11-14,共4页 China Pulp & Paper
关键词 可逆温致变色防伪纸 色差 填料 助留剂 reversible thermochromic anti-counterfeiting paper chromatic aberration filler retention agent
  • 相关文献

参考文献3

  • 1李文戈,朱昌中,王文芬,吴锦屏.可逆热致变色材料[J].功能材料,1997,28(4):337-341. 被引量:47
  • 2梁冶齐.微胶囊技术及应用[M].北京:中国轻工业出版社,1999
  • 3Luukko K, Paulapuro H. Development of fines quality in the TMP process[J]. Journal of Pulp and Paper, 1999, 25(8): 273

二级参考文献11

  • 1李文戈,中国化学学会第五届特种应用化学学术讨论会论文集,1994年
  • 2匿名著者,涂料工业,1993年,1期
  • 3匿名著者,涂料工业,1993年,3期
  • 4鹏搏,染料工业,1991年,3期,10页
  • 5李文戈,硕士学位论文
  • 6匿名著者,CN1060098A
  • 7匿名著者,CN1071182A
  • 8陈秀云,涂料工业,1986年,2期,41页
  • 9王良御,液晶化学,1985年,17页
  • 10团体著者,涂料工业,1978年,1期,5页

共引文献48

同被引文献27

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部