期刊文献+

输电铁塔参数化建模方法及应用 被引量:10

Parametric modeling for power-transmission towers
下载PDF
导出
摘要 分析输电铁塔结构的特点,提出采用构造实体几何(CSG)参数化方法模型描述铁塔结构;将铁塔结构基本模块的特征参数分为定形参数和定位参数,通过特征参数的约束方程生成模块的方法修改和生成结构设计模块.编制输电铁塔结构的参数化建模软件,可以通过修改模型的特征参数,快速得到其他同类塔型的模型,极大地提高了建模效率.以500 kV酒杯型输电铁塔塔头结构为例,建立其参数化设计模型,参数的选择合理,符合工程设计习惯,得到的输电铁塔塔头结构符合设计规范要求. With regard to geometrical features of transmission towers, a constructive solid geometry (CSG) parametric method is first developed for configuring transmission towers. The modular parameters of transmission towers are then categorized into position-related and shape-related parameters. Next, the constraint functions of design parameters are applied for modifying the existing structural modules and generating new structural modules. Consequently, the software is developed for the purpose of parametric modeling. Accordingly, the design options are obtained via parameter modifications. In this fashion, the design efficiency can be significantly improved. Finally, the top structure of a cup-shaped 500 kV power-transmission tower is used as an example to demonstrate this method. It is indicated that, based on the effective parametric modeling and parameter selection, this approach concords with the traditional design methods and expected design specifications.
出处 《中国工程机械学报》 2007年第3期272-276,共5页 Chinese Journal of Construction Machinery
关键词 参数化方法 建模 输电铁塔 parametric method modeling power-transmission tower
  • 相关文献

参考文献6

二级参考文献17

  • 1郭连水,宋建平,戴约真.基于特征的参数化设计方法[J].航空学报,1994,15(10):1201-1206. 被引量:12
  • 2向文,钱小平,黄金国,周济,余俊.基于特征的三维参数化造型[J].中国机械工程,1994,5(4):4-6. 被引量:9
  • 3高曙明,彭群生.一种适用于特征造型的参数化设计方法[J].计算机学报,1996,19(4):300-307. 被引量:8
  • 4贺建平,丁秋林,孙正兴.基于特征的产品信息建模技术研究[J].计算机辅助设计与制造,1996(3):32-34. 被引量:13
  • 5杨行健.微机三维实体造型原理与实践[M].西安:西北工业大学出版社,1990..
  • 6陈炜 林忠钦 等.现代汽车覆盖件模具设计方法研究[J].中国机械工程,2000,11(1):77-79.
  • 7Cuningham JJ, et al. Designing with Features: the Origin of Features[A]. Proc of 1988 ASME international computers in engng[C], 1998,1.
  • 8Case K, Gao J, Gindy N N Z. The Implementation of a Feature-based Componet Representation for CAD/CAM Integration[J] .Pro Instn Mech Engrs, 1994,28(2).
  • 9Case K, Gao J. Feature Technology: An overiew[J]. INT JCIM, 1993,6(1,2).
  • 10Vamce U, David C A. Feature-based Modeling for Automatic Mesh Generation[J]. Engineering with Computers, 1992, (8).

共引文献84

同被引文献74

引证文献10

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部