期刊文献+

注塑模三维稳态温度场边界积分方程的修正与离散 被引量:1

Revising and Dividing of BEM Equation for Three-dimensional Steady State Cooling Analysis in Injection Molding
下载PDF
导出
摘要 采用位势理论及数学物理方程的有关方法,对三维稳态注塑冷却分析边界积分方程进行修正和离散,将结果应用于冷却建模,有助于对模型的组织结构进行优化处理,提高分析计算的精度和稳定性。 The revising and dividing of the BEM equation for three-dimensional steady state model of cooling analysis in injection molding were accomplish by means of potential theory and method of mathematical physics. With the application of the results, it was easy to optimize the structure of cooling model and contribute to enhancing the precision and stability of cooling analysis.
出处 《塑料工业》 CAS CSCD 北大核心 2008年第5期39-42,共4页 China Plastics Industry
关键词 温度梯度 热传导方程 边界元法 Temperature Gradient Heat Conduction Equation BEM
  • 相关文献

参考文献3

  • 1神谷纪生.边界元素法基础[M].沈阳:东北工学院出版社,1987.
  • 2南京工学院数学教研组.数学物理方程与特殊函数[M].北京:人民教育出版社,1992.
  • 3申长雨 李倩.橡塑模具优化设计技术[M].北京:化学工业出版社,1995.79-135.

共引文献3

同被引文献11

  • 1石宪章,田中,申长雨.注塑冷却系统中管网基本圈的优化[J].中国塑料,2004,18(5):90-92. 被引量:3
  • 2赵振峰,王静,陈政,申长雨,谭素琼.注塑模具冷却管网分析计算[J].郑州大学学报(工学版),2006,27(2):29-31. 被引量:4
  • 3石宪章. 注塑冷却数值分析方法的研究与应用[D]. 郑州:郑州大学,2006.
  • 4Barone M R,Caulk D A. Special boundary integral equations for approximate solution of laplace’s equation in two-dimensional regions with circular holes[J]. Quarterly Journal of Mechanics and Applied Mathematics,1981,34:265-286.
  • 5Jeppson R W. Analysis of Flow in Pipe Networks[M]. Boston:Butterworth Publishers,1976:1-86.
  • 6Burton T E,Rezayat M. A Special Boundary Integral Formulation to Simulate a Manufacturing Process,Symposium of Advanced Boundary Element Methods:Applications in Solid and Fluid Mechanics[M]. International Union of Theoretical and Applied Mechanics,Berlin,New York:Springer-Verlag,1987.
  • 7Brebbia C A,Telles J C F,Wrobel C. Boundary Element Techniques-Theory and Applications in Engineering[M]. New York:Springer-Verlag,1984.
  • 8Shen ChangYu,Shi Xian Zhang,Zhao Zhen Feng. Steady-state module of cooling analysis in injection molding[J]. Polymer-Plastics Technology & Engineering,2007,46(6):561-568.
  • 9章熙民.任泽霈.梅飞鸣.等.传热学[M]北京:中国建筑工业出版社,1987 49~73.
  • 10陈静波,王利霞,申长雨,刘春太.注射模中冷却系统的流动分析[J].模具工业,1998,24(4):30-33. 被引量:4

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部