期刊文献+

铝合金表面涂装工艺的研究 被引量:2

The Research on Aluminum Alloy Surface Coating Technique
下载PDF
导出
摘要 介绍了无铬及低铬二种处理铝合金的方法,通过实践证明:经这二种方法处理后的铝合金表面,完全达到了涂装基膜的要求. Two methods of processing alumium alloy were introduced,its are low chrominum method and chrominumless one. The experiments have proved that the Aluminum Alloy surface can completely meet the coating requirements after processing.
作者 杨晓燕
出处 《表面技术》 EI CAS CSCD 1997年第6期17-18,共2页 Surface Technology
关键词 前处理 涂料 涂装 铝合金 Prctreatment,Coating Material,Coating
  • 相关文献

同被引文献13

  • 1Gundersen R. and Nisanciogtu K. Design of aluminium structures[J].CORROSION 1990: Vol 46, No 4: 279-285.
  • 2Christian Knutsen. Aluminium Applied for Structures" Possibilities and Challenges, Proceedings of the Eleventh international Offshore and Polar Engineer Conference [D].2001,Stavanger, Norway, June: 17-22.
  • 3Afseth A, et al. Influ-ence of heat treatment and surface conditioning on filiform corrosion of aluminium alloys AA3005 and AA5754[J]. Corrosion Science, 2001, 43(12): 2359-2377.
  • 4Searles J Let al.Stress corrosion crac-king of sensitized AA5083 (Al-4.5Mg-1.0Mn) [J]. Materials Science Forum, 2002:396-402.
  • 5Abalie A, et al. Sanchex-AMaya J M. Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion[J]. Corrosion Science, 2004:1909-1920.
  • 6Tbrinksmeier E,Eckebrecht J.Residual stress-measurement and causes in machining processes[J],International Institution for Production Engineering Research,1982,31(1):491-509.
  • 7Leey Y, et al. Effect of annealing temperature on microstructures and mechanical properties of a 5083 Al alloy deformed at cryogenic temperature [J]. Scripta Materialia, 2004, 51(4): 355-359.
  • 8林红吉,孟宪林,张海永.喷砂处理铝合金表面形貌及残余应力分析[J].现代涂料与涂装,2010(4):41-44. 被引量:11
  • 9刘清玲,尚雪岭,李红玲.铝及铝合金涂装前处理的研究现状及展望[J].材料保护,2011,44(9):55-57. 被引量:4
  • 10郑毅,崔昭霞.粉末静电喷涂技术及设备的发展与应用[J].现代涂料与涂装,2018,21(3):24-28. 被引量:6

引证文献2

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部