期刊文献+

竹结构材连接件的承载能力 被引量:18

The bearing capacity of the joint composed by laminated bamboo lumber
下载PDF
导出
摘要 对竹结构材螺栓连接件的承载力和破坏形态进行了静载实验研究,结果表明:用竹结构材连接件的结构具有较高的强度、刚度,以及很好的延性。竹结构材连接件的夹板与螺栓同时达到弯曲变形破坏状态,具有较好的整体受力特征,能够保证剪力的可靠传递。 The bearing capacity and failure form of the joint composed by laminated bamboo lumber and steel bolt were studied by static loading experiment. The result showed that the laminated bamboo lumber joint displayed high strength, rigidity and excellent tensility. The main board and bolts of joint failed at the same time. It indicated that the laminated bamboo structure laminate could ensure the effective transmission of shear and showed reliable load resistance integrality.
出处 《南京林业大学学报(自然科学版)》 CAS CSCD 北大核心 2008年第3期67-70,共4页 Journal of Nanjing Forestry University:Natural Sciences Edition
基金 林业科学技术推广项目(2006-103) “十一五”国家科技支撑计划专题(2006BAD181307)
关键词 竹结构 连接件 承载力 破坏形态 Laminated bamboo lumber Joint Bearing capacity Failure form
  • 相关文献

参考文献18

  • 1Heine C P. Simulated response of degrading hysteretic joints with slack behavior[ D ]. Blacksburg, VA:Virginia Polytechnic Institute and State University, 2001.
  • 2Mclain T E, Tangjitham S. Bolted wood joint yield model [ J ]. Journal of Structural Division, ASCE, 1983,109 ( 8 ) : 1820 - 1835.
  • 3Trayer G W. The Bearing Strength of Wood Under Bolts[ R] . USDA Washington DC :Technical Bulletin,1932.
  • 4Zahn J. Design equation for multiple fastener wood connections [ J ]. Journal of Structural Engineering, ASCE, 1991,117 (11 ) :3477- 3486.
  • 5Soltis L A, Hubbard F K, Wilkinson T L. Bearing strength of bolted timber joints [ J]. Journal of Structural Engineering, ASCE, 1986,112 (9) : 2141 -2154.
  • 6Soltis L A, Wilkinson T L. Bolted-Connection Design. USDA Forest Service General Technical Report FPL- GTR -54 [ R]. Madison WI: Forest Products Laboratory, 1987.
  • 7Mohammad M, Quenneville J H P,Smith I. Influence of cyclic loads on strength and stiffness of bolted timber connections[ J]. Proceedings of the 5th World Conference on Timber Engineering, 1998 (1) : 375 -382.
  • 8Wilkinson T. Dowel Bearing Strength USDA Forest Service Research Paper FPL -RP -505 [ R ]. Madison WI:Forest Products Laboratory, 1991.
  • 9ASTM. Standard Test Method for Evaluating Dowel-Bearing Strength for Wood and Wood-Based Products. American Society of Testing and Materials Standard D 5764 - 97a[ S]. Philadelphia PA ,2001.
  • 10ASTM. Standard Test Method for Determining Bending Yield Moment of Nails. American Society of Testing and Materials Standard F 1575 -95 [ S ]. Philadelphia PA, 2001.

同被引文献163

引证文献18

二级引证文献106

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部