摘要
采用液态压铸技术,研究了压铸工艺参数对AM60B合金显微组织的影响。试验结果表明,当浇注温度为680℃、模具温度为180℃、压射速度为3.0m/s、压射比压为75MPa时,压铸镁合金AM60B可以获得组织均匀细小、表面光滑、缺陷极少的铸件。
The effect of die casting processing parameters on the microstructure of AM60B alloy is studied by liquid die casting technology. The result of experiment shows that the castings of AM60B alloy with more uniform small structures,relatively smooth surface and little defect castings are made by controlling pouring temperature(680℃), mold temperature(180℃),die casting speed(3. 0m/s)and pressure(75MPa).
基金
甘肃省自然科学基金资助项目(ZS031-A25-029-C)
甘肃省有色金属新材料省部共建国家重点实验室开放基金资助项目(SKL03001)
关键词
AM60B合金
压铸
微观组织
工艺参数
AM60B alloy, die casting, microstructure, processing parameters