摘要
通过环氧树脂和丁腈橡胶的共混,制备出了环氧树脂改性丁腈橡胶硫化胶;考察了环氧树脂种类、用量以及反应性丁腈橡胶作增容剂对共混胶性能的影响。结果表明:使用环氧树脂E12可使丁腈橡胶的拉伸强度和撕裂强度明显提高;在此体系中加入端胺基液体丁腈橡胶后,撕裂强度和硬度进一步提高。硫化胶溶胀试验和红外分析结果表明:端胺基液体丁腈橡胶与环氧树脂发生了部分交联反应。
NBR vulcanizate modified by epoxy resin was prepared through blending NBR and epoxy resin The effect of the epoxy resin and level, the addition of amine-terminated butadiene acrylonitrile rubber （ATBN） on the properties of the blend were discussed. The results showed that the tensile strength and the tear strength of NBR/EPE12 blend were much higher than that of NBR, and the hardness and the tear strength of NBR/EPE12 blend were improved by adding in ATBN. FTIR results showed that ATBN reacted with epoxy resin and contributed to the increase of the hardness and the tear strength.
出处
《特种橡胶制品》
2008年第3期11-14,共4页
Special Purpose Rubber Products
