摘要
A DC-10Mb/s laser diode driver,compatible with TTL and CMOS levels,is presented. The optical power corresponding to‘1＇ and ‘0＇ can be set independently with resistors off-chip and stabilized with a closed loop. A novel peak-to- peak optical power monitor and stabilization mechanism is introduced. The circuit, fabricated in a CSMC 0. 5μm mixed signal CMOS process, can provide 120mA maximum drive current and 0. 6dB extinction ration fluctuation over - 20 ＋ 80℃ ,which is independent of input pattern.
设计并实现了一种适用于DC-10Mb/s速率、兼容TTL和CMOS输入电平的激光器驱动电路.该电路通过片外电阻可以独立地设置激光器发送光脉冲的‘1’功率和‘0’功率,并以闭环方式实现稳定的‘1’,‘0’发送光功率.介绍了一种新颖的峰-峰值光功率检测的工作机制,并能得到稳定的峰-峰值光功率.整个电路采用CSMC 0.5μm混合信号CMOS工艺实现,芯片最大输出驱动电流为120mA,在不要求输入码型的情况下,发送光脉冲的消光比波动在-20^+80℃范围内小于0.6dB.
