期刊文献+

材料表面能影响污垢诱导期的实验研究与理论分析 被引量:5

Experimental Investigation and Theoretical Analysis on the Effect of Surface Energy upon the Fouling Induction Period
下载PDF
导出
摘要 在实验基础上得到了不锈钢、钛管和铜管三种材料的换热管的诱导期,并运用表面能理论分析了材料表面能和界面能对污垢诱导期的影响。结果表明,随着材料表面能或系统界面能的增大,污垢诱导期缩短;不锈钢的污垢诱导期长于钛管和铜管。 This paper gained the fouling induction period of three kinds of heat exchangers which are made of stainless-Steel, titanium and copper based on experiment, and analyzed the effect of surface energy on fouling induction period by theoretical analysis. The result indicated that the fouling induction period decreased with the increase of surface or interface energy. The induction period of stainless-steel is longer to titanium or copper.
出处 《东北电力大学学报》 2008年第1期45-48,共4页 Journal of Northeast Electric Power University
基金 国家自然基金项目(NO.50576009)
关键词 诱导期 表面能 界面能 污垢特性 Surface Energy Induction Period Interface Energy Fouling Characteristics
  • 相关文献

参考文献9

  • 1[1]Markus Forster,Matthias Bohnet.Modification of molecular interactions at the interface crystal/heat transfer surface to minimize heat ex-changer fouling[J].Int[J] Thrm Sci 2000 39 697~708.
  • 2任晓光,刘嘉敏,刘长厚,赵起,Hans Mler Steinhagen.表面离子注入降低池式沸腾条件下CaSO_4污垢生成[J].高校化学工程学报,2001,15(5):415-419. 被引量:8
  • 3[3]H Müller-Steinhagen,Q Zhan.Investigation of low fouling surface alloys made by ion implantation technology[J].Chemical Engineering Science,1997,52 (19):3321~3332.
  • 4徐志明,甘云华,张仲彬,杨善让.弧线管传热与污垢性能的实验研究[J].工程热物理学报,2004,25(3):496-498. 被引量:14
  • 5[5]D Q Kern,R E Scaton.ATheoretical Analysis of Thermal Surface Fouling[J].Chem.Eng.Prog,1959,(4):258~262.
  • 6高明,孙奉仲,黄新元,史月涛,王乃华.换热器结垢工况下换热系数变化的分析研究[J].能源工程,2003,23(4):9-13. 被引量:17
  • 7[7]Q.Zhan et al.DEVELOPMENT AND EVALUATION OF Ni-Cu-P-PTFE COMPOSITE COATINGS TO MINIMIZE MICROBIAL ADHE-SION.Heat Exchanger Fouling and Cleaning-Challenges and Opportunities,2005,5,Volume.RP2.
  • 8[8]吴大诚,朱谱新,王罗新.表面、界面和胶体原理及应[M].化学工业出版社,2005.
  • 9[9]Van Oss G J,Good R J.The equilibrium distance between two bodies immersed in a liquid[J].Colloids and Surfaces,1984,8:373-377.

二级参考文献11

  • 1西安交通大学热工教研室.在换热器传热实验中用威尔逊图解法确定给热系数[J].化工及通用机械,1974,(4):24-30.
  • 2D Q Kren, R E Seaton. A Theoretical Analysis of Thermal Surface Fouling[ J ]. Chem Eng Prog, 1959,4 : 258 - 262.
  • 3David, Butterworth. Design of Shell and Tube Heat Exchangers When the Fouling Depends on Local Temperature and Velocity [ J ]. Applied Thermal Engineering 2002, 22 :789 - 801.
  • 4Kern D Q, et al. CEP, 1959:55- 71.
  • 5Norman Epstein. Fouling in Heat Exchangers Processing[ A ]. The sixth International Heat Transfer Conf[ C ].1978.
  • 6Steinhagen H M,Can J Chem Eng,2000年,78卷,12页
  • 7Rei B M,学位论文,1996年
  • 8N F Glen, J H Howarth, A M Jenkins. The Estimation of Errors and Uncertainty in the Determination of Fouling Resistances. In: Proceedings of an International Conference on Understanding Heat Exchanger Fouling and Its Mitigation. Italy, 1997
  • 9V Gnielinski. New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flows. Int. Chem. Eng.,1976, 16:359-368
  • 10任晓光,ZhaoQ.,Muller-SteinhagenH..磁控溅射DLC表面降低池式沸腾下CaSO_4污垢生成[J].化工学报,1999,50(3):404-406. 被引量:9

共引文献36

同被引文献54

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部